• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Input on blow-by oil solution

  • Thread starter Thread starter Ge0STANG
  • Start date Start date Aug 19, 2005
G

Ge0STANG

New Member
Aug 20, 2004
19
0
0
Aug 19, 2005
#1
  • Aug 19, 2005
  • #1
I have about 90k on my 96 gt. It has a problem with slowly buring oil. Ill have to add some oil every so often. I Bought Lucas heavy duty oil stabilizer to add in with the oil. my friend swears by it. also what kid of oil should i be using/blending with my engine with this sort of problem?

any expierence or help would be great
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Aug 19, 2005
#2
  • Aug 19, 2005
  • #2
You can make yourself a oil to air filter, and splice it into your PCV system. All you need to do, is go to Wal-Mart, go to their Campbell and Haussfeld tools and purchase a water to air filter. Take this piece, go to home depot or Lowes, and match up a set of matching barbs to it. I purchased one barb that was two sided and cut it in half and used the two pieces for each side of the air/water filter. Then, just cut your PCV hose in two equal halves where it connects to your intake hosing, place the hoses over the barbs of the filter, and use some small hose clambs to secure everything. You will notice over time, this filter device will catch the oil that blows by in the PCV line that runs to the intake. All you have to do is dump the oil it catches before it gets full. Pretty simple. It sounds harder than what it is, but once you get into it, its not all that difficult to make. It shouldn't cost but about 20 dollars in parts.

EDIT: As for the current oil you have in your intake, I would probably just remove the intake hosing, throttle body, and upper plenum so I could clean each of them with some intake/carb cleaner spray. This will help clean up the intake. Or, you can just run some seafoam or other good intake cleaner through the intake to clean it out. As for the lucas oil stabalizer, I don't know how good it is. Some people have used it with good results, others have not. I personally think if you're not having any leaking issues or serious oil consumption issues, then oil additives are not needed. Most additives tend to be snake oil anyways. What current type of motor oil and weight of oil are you using ?
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
L
Engine 97 mustang gt manual weird idol when off the throttle and coasting in 3rd, 4th, or 5th
  • Lanezs
  • Jun 9, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
7K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
21K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?