• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

intake cuestion

  • Thread starter Thread starter aleborjas
  • Start date Start date Sep 24, 2005

aleborjas

New Member
Sep 11, 2005
610
0
0
Sep 24, 2005
#1
  • Sep 24, 2005
  • #1
hi

wich is better between the comp polymer power box and typhoon and wich one produces more power?
 

jb1dsl

Member
May 24, 2004
566
0
17
Marianna, Fl.
Sep 24, 2005
#2
  • Sep 24, 2005
  • #2
What are your engine specs and what are you planning on doing with this car?
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Sep 24, 2005
#3
  • Sep 24, 2005
  • #3
ditto.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Sep 24, 2005
#4
  • Sep 24, 2005
  • #4
aleborjas said:
hi

wich is better between the comp polymer power box and typhoon and wich one produces more power?
Click to expand...

http://greenwoodchevy.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=GCGPPEDH&Product_Code=54021

Is that the Typhoon you are talking about?

If yes...
The longer runners will be better suited for 302 displacement motors with mild to moderate mods. The lack of runner length on the comp upper will increase the upper rpm power and decrease the low end torque. I ran my stockish 302 for a while with a comp upper on a cobra lower, and was not happy with the low end. It did not seem to come to life until about 3500rpm (not good for a street car). This will vary with heads and cam though. For a road car I would not recommend short runners on a 302. For a track car (corners or drag) it could be very beneficial.

With larger displacements the short runner intakes become more feasible. A 331 on up will probably be able to take advantage of the short runner flow at higher revs, and still produce reasonable torque.
Currently I am running a comp upper on the 408 stroker. The long runner manifolds are very restrictive to the upper rpms with 351w based strokers, I have seen a couple of dyno tests on these.

Also, I would not recommend the comp manifold for boost. It may be able to hold the pressure, but I will be upgrading to a metal short runner upper when I add boost.

jason
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
476
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
J
Intake
  • James S
  • Jul 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
305
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2026
James S
J
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
486
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
351W/5.8 EFI intake manifolds fading away...
  • Ryno5150
  • Jan 13, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
732
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 7, 2026
nickyb
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
453
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?