intake dyno numbers?

[bimmertech]

just curious if anyone has any real world dyno numbers of a cobra intake vs. a good street intake. i am just curious if the gain is worth the $600 investment.

i guess a combo would help: afr 165's. tfs1 cam, 1.7rr, full exhaust, 70mm t/b, cobra intake.

 

[95COBRA241]

check out this website. He has dyno graphs of several intakes.

www.tmossporting.com

 

[scarless]

Yes, some intakes will give you 5-12 HP up high, but loose 5-8 HP don't low and torque. TMoss can port your lower and it will get real close to the same numbers.
http://www.compcams.com/Community/Articles/Details.asp?ID=-283745471

 

[bimmertech]

Yes, some intakes will give you 5-12 HP up high, but loose 5-8 HP don't low and torque. TMoss can port your lower and it will get real close to the same numbers.
http://www.compcams.com/Community/Articles/Details.asp?ID=-283745471

thanks for the article. bout what i expected, not really worth the money right now.

 

[tmoss]

My website has a before/after dyno test of a very similar combo to yours and the only changes to the car were the ported Cobra lower - gains were 16HP/13lb-ft. Much cheaper than the intake switch and just as effective.