interesting air induction idea????

cas69aus19 · Sep 17, 2005

hey guys,

i was thinking about fabricating a cold air intake set up for my 69 carbed 302.. i know on my toyo truck it helped out quite abit with breathablility. but that is efi.
how well will it work for carb setup????

it will most likely run down by the front valance.

how would i mount it to the carb???

just a thought if anyone has done this before.

THX 138 · Sep 17, 2005

look up the setups from the old trans am serises Bosses. the ram air was suppose to be good for 1 psi boost.

reenmachine · Sep 17, 2005

Besides the itsy-bitsy boost, you get a nice improvement from the 40 deg. cooler air you get outside instead of sucking up hot air from under the hood.

How concerned with looks are you? A snorkle-type air cleaner with dryer duct tubing going up front does the trick, and evolve from there according to desired looks and your budget.

HHStang · Sep 17, 2005

I fabbed a duct system for my supercharger to put the intake in the inner fender. Here are work pics though inner fender one isn't here..

Red Barchetta · Sep 17, 2005

Check out this article from Ford Muscle. It wouldn't be too tough to fab up something similar to what they have here.

2nd Mustang · Sep 18, 2005

I forgot what car show it was, but I saw an early mustang with an "underhood" scoop. It looked like an air box on the bottom side of the hood that got the air from the front grille area, real trick looking. Another idea is what the roundy round guys do. Build an airbox over the carb and have it suck air from the cowl via the firewall. It is supposedly a high pressure area at the bottom of the windshield.

reenmachine · Sep 18, 2005

2nd Mustang said:
Build an airbox over the carb and have it suck air from the cowl via the firewall. It is supposedly a high pressure area at the bottom of the windshield.

It is -- that's how your cowl vent works.

Red Barchetta · Sep 18, 2005

2nd Mustang said:
...Another idea is what the roundy round guys do. Build an airbox over the carb and have it suck air from the cowl via the firewall. It is supposedly a high pressure area at the bottom of the windshield.

As reenmachine said, it is. However, IMHO, I have doubts as to how effective it would be. Considering the distance between the base of the windsheild and the edge of the hood, it looks like you'd have to be moving pretty fast in order for it to build enough pressure for a cowl hood to work. When I look at a 1969 Camaro, as an example, it seems as if the distance between the windshield and hood is closer than a Mustangs.

I think if a cowl hood was effective, Shelby or Ford would have offered one back in the day. Instead, look at all of the various hoods that were offered. None of them were cowl induction. Anyone have access to a wind tunnel?

70MustangGrande · Sep 18, 2005

The idea of removing the bogus vent deletes on both outside fenders just next to the headlights on my 70, laying some metal screen over the holes to keep bugs out and running a fresh air line to the air filter has been tempting for me in the past. Only problem is that I don't like the idea of drilling holes in my sidewalls to the engine compartment. I'm sure someone has done something like that before though.

2nd Mustang · Sep 18, 2005

http://www.planethoustonamx.com/main/amc_ram_air__cowl_induction.htm

cas69aus19 · Sep 18, 2005

ok i like the ideas you guys are giving but i think i am trying to go for a different approach.

i want to have the filters down by where the vents are on this link. "Ford Muscle."
http://www.fordmuscle.com/archives/1999/12/ramairbox/index.shtml
i would build a housing around the filter that is similiar to a k&n style intake
there would still be the holes cut in the inside fender for direct air flow.

http://www.autoanything.com/generic_pages/product_image.aspx?p_id=1913&g_id=459

as they did in the ford muscle page i would use an existing base plate that was cut down and had a round side built up with a sealed top. i could use fiberglass to form the shape and seal for the air ducts that come off of the new base.

something similiar to this.
http://viewmorepics.myspace.com/ind...=B3F41DA8-18EC-4DB3-89F92605D750B64F502866625

i think i have just about everything now. with an image it makes it more clear.

HistoricMustang · Sep 18, 2005

Let me get a pic of mine and throw it up. Fabricated from aluminum and uses the Edelbrock type air cleaner.............................

HistoricMustang
www.historicmustang.com

blue66tang · Sep 19, 2005

HistoricMustang said:
Let me get a pic of mine and throw it up. Fabricated from aluminum and uses the Edelbrock type air cleaner.............................

HistoricMustang
www.historicmustang.com

I would like to see a pic of yours. I would like to do a set up on mine some day.

dans70stang · Sep 20, 2005

Why not just buy a hood with a ram air hood scoop rather than drill holes in the original core support or other parts.

MustangMatt1966 · Sep 20, 2005

isnt that article with the ram air box and the 2 ducting that inserts into the front of the car similar to what the ford thunderbolts use to have???? looks like it to me i know those things were damn fast! lol

66P51GT · Sep 20, 2005

Those of you with cowl hood may be interested in this:

Available from http://www.deltabaymustang.com/products.htm

HistoricMustang · Sep 23, 2005

Bump.

Hey, the wife will be out of town tomorrow and my son is now out of Houston and Rita's path so I will get photo's up Saturday on my cold air induction system.

HistoricMustang
www.historicmustang.com

HistoricMustang · Sep 24, 2005

Here you go, using Shelby style hood scoop. With no scoop just run at least one 3" diameter flex hose, two would be better, from under front valance into this box.

HistoricMustang
www.historicmustang.com

Happy Motoring!

interesting air induction idea????

cas69aus19

New Member

THX 138

Member

reenmachine

HHStang

Member

Red Barchetta

2nd Mustang

reenmachine

Red Barchetta

70MustangGrande

2nd Mustang

cas69aus19

New Member

HistoricMustang

Active Member

Attachments

blue66tang

Attachments

dans70stang

New Member

MustangMatt1966

New Member

66P51GT

New Member

Attachments

HistoricMustang

Active Member

Attachments

HistoricMustang

Active Member

Attachments

Similar threads

interesting air induction idea????

New Member

Member

Member

New Member

Active Member

Attachments

Attachments

New Member

New Member

New Member

Attachments

Active Member

Attachments

Active Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency