98blackstallion Member Mar 30, 2005 602 0 17 mtn home arkansas May 3, 2011 #1 May 3, 2011 #1 Which intake gaskets are you guys using with these heads?
BlownFiveLiter have car, will race....wait, it doesn't run 15 Year Member Nov 29, 1999 3,133 18 108 Chicagoland May 3, 2011 #2 May 3, 2011 #2 Felpro 1250's would work.
98blackstallion Member Mar 30, 2005 602 0 17 mtn home arkansas May 3, 2011 #3 May 3, 2011 #3 Would it make a difference if the gt40 heads are on a 351w block?
BlownFiveLiter have car, will race....wait, it doesn't run 15 Year Member Nov 29, 1999 3,133 18 108 Chicagoland May 3, 2011 #4 May 3, 2011 #4 It shouldn't matter. Those heads are going to choke 351+ cubes though. It'll make torque, but lack in HP.
It shouldn't matter. Those heads are going to choke 351+ cubes though. It'll make torque, but lack in HP.
revhead347 Apparently my ex-husband made that mistake. 20+ Year Stangneter Jun 14, 2004 9,301 1,644 214 Acworth, GA May 3, 2011 #5 May 3, 2011 #5 Stock replacement is fine. There's no point in spending the extra money on the 1250s. Just get a gasket for a 94' Lightning from the parts store. That will have the little rubber pieces for the valley in it for a 351. Kurt
Stock replacement is fine. There's no point in spending the extra money on the 1250s. Just get a gasket for a 94' Lightning from the parts store. That will have the little rubber pieces for the valley in it for a 351. Kurt