Is belt dust normal with an RR pulley?

P

Primo

New Member

Jun 9, 2003

281

0

0

Phoenix

Dec 4, 2003

#1

• Dec 4, 2003

• #1

Just installed a 3.3" RR pulley about 2 weeks ago and I am experiencing a lot of belt dust. My stock 3.5" never left any belt dust My replacement belt aslo was a bit longer even though it was the same part number. So there is a significant difference in slack. Would a shorter belt help? Likewise, it took me about an hour to get the new belt on while struggling with the damn tensioner.

 

JM01

Founding Member

Nov 23, 2001

341

0

17

Branch Office of Hell (110º)

Dec 4, 2003

#2

• Dec 4, 2003

• #2

If you are having belt dust.... 99% of the times is due to belt sliping (sp?)

 

MrMorden

New Member

Nov 28, 2001

754

0

0

Athens, GA

Dec 4, 2003

#3

• Dec 4, 2003

• #3

A small amount of dust is normal. If you're getting a lot, though, you could have a tensioning issue. Check the belt tension, and if it's not very taut or the tensioner hasa whole lot of movement in it, try a belt 1/2" shorter.

 

4

46gtsblown

Founding Member

Jan 9, 2002

278

0

0

Dec 4, 2003

#4

• Dec 4, 2003

• #4

You have already stated the belt you put on was longer. It is probably too long and slipping. Put a shorter belt on there and you will eliminate the dust.

Dwayne

 

MrMorden

New Member

Nov 28, 2001

754

0

0

Athens, GA

Dec 4, 2003

#5

• Dec 4, 2003

• #5

Duh, I didn't read well enough. Longer belt + smaller pulley = massive belt slip.

 

P

Primo

New Member

Jun 9, 2003

281

0

0

Phoenix

Dec 4, 2003

#6

• Dec 4, 2003

• #6

How do I get a Gates original belt? The only parts store that has a "so called gates" is Napa. Yet Napa gave me the same part number that was on the gates belt