• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Is it true?

  • Thread starter Thread starter arbailey
  • Start date Start date Jun 22, 2005

arbailey

Founding Member
Sep 24, 2002
199
0
16
New Jersey
Jun 22, 2005
#1
  • Jun 22, 2005
  • #1
I saw a thread on the corral that said factory struts are 70/30 and factory rear shocks are 50/50, and not to waste the money on the Lakewood versions because we already have them. The discussion continued but neither side could "prove" their case. Anyone here know the truth? Also, would that same argument hold true for any "stock" replacement strut / shock combo like say KYB's?
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Jun 22, 2005
#2
  • Jun 22, 2005
  • #2
If you still have the factory shocks and struts, you will def. benefit from upgrading. Replacing any piece that old and worn out is worth it, even if replacing with the same rate components. I have Tokico HP Blues - they are a hell of a lot different than the stock '93 components were. Just my $0.02.
 

HardmanGT

Founding Member
Oct 5, 2001
500
0
17
Thomaston, CT
Jun 22, 2005
#3
  • Jun 22, 2005
  • #3
My Lakewoods are nothing like stock. I really don't care what another thread may have to say about the subject. There is no comparison. I you do the switch you will know what I mean.
 

NosPony

New Member
Apr 2, 2004
278
0
0
Canton, Il
Jun 22, 2005
#4
  • Jun 22, 2005
  • #4
Yea since my lakewood install. It is nothing like factory stuff. YOU will notice the differance.
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Jun 22, 2005
#5
  • Jun 22, 2005
  • #5
I seem to recall reading that the factory struts and shacks are 50/50. But i can't offer proof of where I read it.
 

arbailey

Founding Member
Sep 24, 2002
199
0
16
New Jersey
Jun 23, 2005
#6
  • Jun 23, 2005
  • #6
I emailed the tech department at Lakewood and asked if they knew anything about factory stuff being 70/30 and 50/50. Here is their response:

"The stock struts are more of a 60/40 and the rears are pretty close to a 50/50. It will vary depending on the make of the car. But we are not aware of a factory 70/30 strut anywhere on the market. Thank you."
 
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
222
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Mustang5L5 DIY MS3x Thread
  • Mustang5L5
  • Mar 12, 2019
  • Digital Self-tuning Forum
  • 4 5 6
Replies
109
Views
16K
Digital Self-tuning Forum Sep 13, 2025
Mustang5L5
On3 Performance Install Tips
  • flstang65
  • Dec 15, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
12K
1996 - 2004 SN95 Mustang -General/Talk- Mar 17, 2023
atomicfox236
A
Install Daytona Sensors CD-1 Ignition Mustang Fox SN95
  • revhead347
  • Sep 21, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 11, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?