Is there a set of springs that do 2" front and 1" rear?

[03TrueBlue]

Is there a set of springs that do 2" front and 1" rear? Looking to get some rake to it but not to much.On my 99 I cut 1 coil and it sat about right but the rear needed to be a little lower.

 

[StangYellow]

I think people are mixing and matching their springs. I got the Sportlines and the rear sits lower than the front does. Maybe its the hefty hotties i have in the backseat?

 

[Mach1Run]

maybe mix and match a set, someting like sportlines on the front and stock mach 1s on the back? Thats all I did with my mach to get a rake since its already about 3/4 inch lower than a gt.

 

[007]

I'm mixed. You could do Steeda rears and H&R fronts for example, although that would be a pretty big rake. Trouble is you never know exactly how its going to sit until you try it. I had H&R SS all round and my nose was SLAMMED and I kept scraping. Now I have Roush fronts and the car sits almost level.

 

[scupking]

I have FRPP B springs. On the front I have the steeda X-2 ball joints which don't require the isolators so the front is just a little over a 1.5" drop and my rear is 1" or so. It gives a nice rake.

 

[whyask]

Do H&R super sports in the front that will drop 2" and steedas i the rear for 1.2"

 

[Mossberg]

The Ford C springs give a nice rake