IS there a way to get traction with stock pony rims?

ShortThrow50 · Feb 4, 2007

my goal is to keep the car looking all stock. no gauges, etc. I want to keep the ponies as well. As it sits right now with 373's. Im spinning all the way through second. Is there a tire I could get? If its wider, do i need to get a spacer to clear the quad shocks? What have others done? I plan on getting tko 600 and eventually trick flow top end. How can i get this power to grab?

Demented4.6 · Feb 4, 2007

2 words. Drag radials. wouldn't hurt putting some decent suspension under it either

ShortThrow50 · Feb 4, 2007

i did the suspension. Its not really a drag suspension though. I did rear upper and lower control arms. and frpp "c" springs. What is the widest dr i can put on the rims? Who makes them? MT ?

MAC'n89Blckstng · Feb 4, 2007

you could fit a 275. Mickey Thompson makes some nice DOT Slicks that will hook real nice.

ShortThrow50 · Feb 4, 2007

MAC'n89Blckstng said:
you could fit a 275. Mickey Thompson makes some nice DOT Slicks that will hook real nice.

my tires right now almost hit the quad shocks. Do i need a spacer or do i have to remove the quads? Also what is the exact tires size i need

JamesB88 · Feb 4, 2007

I was runing 255/60/16" BFG drag radials the older tread style on ponys and hooked up pretty good but i dont put down to much power. They rubed alittle but nothing a hammer couldnt fix.

GTOreturns · Feb 4, 2007

Nitto DR's. I think theres only 1 size for 16' rims. There great in the rain and last for 15,000 miles. There 1 size bigger then stock so it looks stock.

ShortThrow50 · Feb 4, 2007

GTOReturns said:
Nitto DR's. I think theres only 1 size for 16' rims. There great in the rain and last for 15,000 miles. There 1 size bigger then stock so it looks stock.

cool. Rain wouldnt be a problem. This is for a garage queen that will only see about 500 miles a year

RS200 · Feb 5, 2007

Since you have LCAs, ditch the quad shocks and go with a 255/50R16 ET Street.

Boss 351 · Feb 5, 2007

IS there a way to get traction with stock pony rims?

Easy, add tires... metal rims on pavement don't give much traction

iwashmycar · Feb 5, 2007

Boss 351 said:
Easy, add tires... metal rims on pavement don't give much traction

you beat me to it lol

Aliate X · Feb 5, 2007

I have 255 MT ET radials on my stock ponies, my car looks bone stock from the outside, no gauges, no cowl, nothing. H/C/I 302 with spray, 4.10s, 31 spline etc. etc., no traction problems track or street.

90 · Feb 5, 2007

+1 mickythompson... FTW...

Aliate X · Feb 5, 2007

90_Red_LX · Feb 5, 2007

Et streets on the ponys as said. Best damn drag radial that I know of. Don't run spacers either unless you got a death wish. A fox came in at my dads old shop before I was even old enough to consider driving a car, but my cousin looked at it when he worked there. He complained of a vibration, and when they inspected the wheels, 3 of the lug nuts were gone, and the 4th was very loose. Lets not forget the underpressuregt incident either.

SuperStang83 · Feb 5, 2007

Widen the rim and put a little bigger tire on there!

Flavadave4 · Feb 5, 2007

RS200 said:
Since you have LCAs, ditch the quad shocks and go with a 255/50R16 ET Street.

Thats a horrble way to try and gain traction........if you have issues try flipping the quad shock the other way, some aftermarket ones fit better as well. With out the quads you will be getting some nasty axle roll, ESPECIALLY with tires that hook.

Some drag raidals and you'll be all set!

IS there a way to get traction with stock pony rims?

ShortThrow50

Member

Demented4.6

ShortThrow50

Member

MAC'n89Blckstng

Active Member

ShortThrow50

Member

JamesB88

Member

GTOreturns

Well-Known Member

ShortThrow50

Member

RS200

Member

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe

iwashmycar

Aliate X

Member

90

Active Member

Aliate X

Member

Attachments

90_Red_LX

Member

SuperStang83

Flavadave4

Active Member

Similar threads

IS there a way to get traction with stock pony rims?

Member

Member

Active Member

Member

Member

Well-Known Member

Member

Member

Here sthhhhhhhheeeve take a picthh of my man flowe

Member

Active Member

Member

Attachments

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency