• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Is this enough clearance? (pics)

  • Thread starter Thread starter 91BlckGT
  • Start date Start date Feb 2, 2004

91BlckGT

Founding Member
May 24, 1999
2,386
75
68
in a van, down by the river
Feb 2, 2004
#1
  • Feb 2, 2004
  • #1
Hi.

I put 275/40 DR's on the back, but decided to be crazy and leave my quad shocks on. They clear... But barely.

I've got about 1/4" between the rim and the quad, and about 1/2" from the tire to the rear pipe (it's a Flowmaster 2.5")

Now, I've got steeda LCA, and Ford HD uppers with Steeda bushings. Is this going to be enough to control side-to-side deflection, or am I pretty much screwed and will have to remove the quads?




This pic doesn't have anything to do with the question, but I think it looks cool. Good shot of the new rears.

 

DirtyD916

Active Member
May 25, 2003
804
1
38
Norcal 916
Feb 2, 2004
#2
  • Feb 2, 2004
  • #2
damn im gonna guess that there baers?! Anywho if you dont have many passangers when you drive (if any) then you should be good. Maybe a scrap here and there but other then that you should be good.
 

BlownStangGT

REPEAT
Founding Member
Jan 22, 2002
3,860
6
58
Lancaster, PA
Feb 2, 2004
#3
  • Feb 2, 2004
  • #3
how much is ur car lowered...id love to have 275's inmy rear!
 
S

schoonover_88

New Member
Jan 1, 2004
189
0
0
Feb 2, 2004
#4
  • Feb 2, 2004
  • #4
Damn! That's close!! I would drive it a while and see if any problems come up, if not don't touch it.
 

TT91

Active Member
May 23, 2003
1,536
0
36
Paramus, NJ
Feb 2, 2004
#5
  • Feb 2, 2004
  • #5
your just showing off your sweet looking disc brake setup...
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Feb 3, 2004
#6
  • Feb 3, 2004
  • #6
I never noticed much side-to-side movement, so I would say if you have 1/4" you're fine...just keep an eye on it for a little while.
 
9

9 Deuce GT

Member
Dec 10, 2003
550
1
16
Geneva, NY
Feb 3, 2004
#7
  • Feb 3, 2004
  • #7
Are those 5 lug Baer Brakes? I ask because I am wondering how much longer the rear axles are. I have Cobra discs out back with 5 lug Ranger axles and my 245 45's are pretty close to the body. Just wondering if I should buy custom length axles or not to fit a wider tire on my hog.
 

mike keirstead

New Member
Aug 6, 2003
1,121
0
0
ROLLING A JOINT
Feb 3, 2004
#8
  • Feb 3, 2004
  • #8
The quads don't do crap. I haven't had mine for 2 years. Wouldn't even know they are gone.
 

DemonGT

Founding Member
May 24, 2002
871
51
49
Sparta,WI
Feb 3, 2004
#9
  • Feb 3, 2004
  • #9
have you tryed fliping the quads upside down?
 

91BlckGT

Founding Member
May 24, 1999
2,386
75
68
in a van, down by the river
Feb 3, 2004
#10
  • Feb 3, 2004
  • #10
have you tryed fliping the quads upside down?
Click to expand...

Actually, they are already flipped. They would hit already if they werent. Also, the clearance might be better when I get the car down on wheels.

damn im gonna guess that there baers?!
Click to expand...
Yes, they are.

how much is ur car lowered...id love to have 275's inmy rear!
Click to expand...
1 1/4" front, 1" rear. But the car is a stripper. No rear seat, racing seats inside. I had about 2" of gap on the old tires. I will still have to roll the rim though, because the tire sticks out the side.

your just showing off your sweet looking disc brake setup..
Click to expand...
Why yes, yes I am!

Are those 5 lug Baer Brakes? I ask because I am wondering how much longer the rear axles are. I have Cobra discs out back with 5 lug Ranger axles and my 245 45's are pretty close to the body. Just wondering if I should buy custom length axles or not to fit a wider tire on my hog.
Click to expand...

Yes, they are the 5-lug Baer's. I bought custom Moser 5-lug axles, which retained the stock track width in the rear. That way I could use the same wheels all around (even though I have different size tires). I you used ranger axles (assuming you got the right side ) you should be able to cram 275's under. It's the biggest size you can fit a on fix w/o major changes, but they do fit quite nicely.
 

MUSTANGJOE

Silver Stanger
Founding Member
Apr 9, 2002
1,644
17
59
Feb 3, 2004
#11
  • Feb 3, 2004
  • #11
anypics from the rear of the car...i wanna see how wide 275s look!.. Thanks
 
You must log in or register to reply here.

Similar threads

Drivetrain Rear end clunk
  • seanmahoney
  • Oct 13, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
419
SN95 4.6L Mustang Tech Oct 13, 2025
nickyb
Wheels-Tires Quad shock quandry
  • gearhead77
  • Apr 22, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Apr 27, 2024
Jarhead67
J
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
584
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Tightening upper control arm bushings at ride height dilemma… need some help
  • AnthonyA1234
  • Dec 27, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
51
Views
5K
Fox 5.0 Mustang Tech Feb 27, 2025
General karthief
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
594
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?