Is this normal

[GREG91GT]

The other day at the track i started the car and pulled the spout connecter out and checked my timing, it was at 10 so i put the spout connecter back in and it was still at 10 is this normal or should it change i have never payed much attencion to it before,when does it begin to give advance?

 

[HISSIN50]

In my experience, the puter should have kicked the timing up some as soon as the SPOUT went back in (the 94 GT was the last stang I timed, and it kicked in 10* just from installing the SPOUT).

You might have a cut wire in the SPOUT connector harness.

Good luck.

 

[GREG91GT]

is there anyway the spout connector can go bad.

 

[HISSIN50]

If you suspect the connector, you could put a jumper wire in the harness instead (even a paperclip would work). I sorta doubt the issue is the connector itself, unless it looks like poop.
How does the wires look?

Good luck.

 

[GREG91GT]

I havent had a chance to check them out yet i will have to wait until this weekend