It Was Just Hanging There

Tom Hays · Apr 9, 2017

i recently bought a 94 Mustang with a 3.8 off a yard sale site for $500. I knew the car had been sitting for years and suffering no crank no start at the time it was parked. I knew I had my hands full when I bought it, but I like to have something to tinker with.

Anyway, I got it home replaced the battery and started checking the wiring and then decided to give the crankshaft a turn to ensure I wasn't wasting my time before I put the car on jack stands to get under it. I took off the belt and the harmonic balancer and pulley dropped, it was hanging in by what little shaft was left on the balancer.

Long story short I need to get the rest of that shaft out of the block, preferably without damaging anything else.

Has anyone experienced this? Any ideas?

General karthief · Apr 9, 2017

Pics?

95BlueStallion · Apr 9, 2017

To rebuild the 3.8, or swap it with an Explorer junkyard motor....

90sickfox · Apr 9, 2017

So....the harmonic balancer came apart ? I'm trying to understand what you're saying.

Tom Hays · Apr 9, 2017

Yes the baller shaft is broken off, part of it is still in the car.

General karthief · Apr 9, 2017

Does the engine turn ok?
Not familiar with v6 but looks like you could use small drill bit in several places then pick it out.

Tom Hays · Apr 9, 2017

I was afraid to manually turn the crank bolt to far without the balancer in place. I didn't want to strip the bolt. But, when the bolt got tight and I continued to turn some residual coolant came from the lower radiator hose so I don't feel like the motor is locked up

General karthief · Apr 9, 2017

Stick a screwdriver in the hole and compare the depth to the length of the bolt so you don't bottom out, add washers if needed, take all the spark plugs out and see if it turns.

RangerJoe · Apr 10, 2017

It looks like the collar of the balancer sheared off. That's wierd.

I would start by pulling the timing cover and seeing if you can get a pulley puller behind what's left.

Good luck.

Joe

Mustang5L5 · Apr 10, 2017

Best chance to get that off is to pull the timing cover off, and then see if you can get a puller behind it, or split it carefully to break it off.

Gott break the engine down to this point

Probably explains the no start condition. balancer broke

90sickfox · Apr 10, 2017

It used to happen a lot with explorers. Taking the front cover off is the best way.

That's actually a good sign....means it was probably running when it broke. Not a bad time to put a timing chain in it while you're there.

5.0Droptop · Apr 10, 2017

The other option is to weld a ring to the od of whats left of the balancer. Then put bolt in. Use 3 jaw puller to pull it off.

After closer examination youd have to pull cover as stated.

Tom Hays · Apr 11, 2017

Thanks for the suggestions. I wanted to dig into it yesterday but I found a snake skin in my storage shed and made the mistake of telling my wife about it. She immediately changed my plans to removing every thing from the shed, finding and killing the snake and replacing the floors. Maybe next weekend...

5.0Droptop · Apr 11, 2017

Tom Hays said:
Thanks for the suggestions. I wanted to dig into it yesterday but I found a snake skin in my storage shed and made the mistake of telling my wife about it. She immediately changed my plans to removing every thing from the shed, finding and killing the snake and replacing the floors. Maybe next weekend...

so did you find mr sneaky snake or did he check out of your hotel?

RangerJoe · Apr 11, 2017

Tom Hays said:
Thanks for the suggestions. I wanted to dig into it yesterday but I found a snake skin in my storage shed and made the mistake of telling my wife about it. She immediately changed my plans to removing every thing from the shed, finding and killing the snake and replacing the floors. Maybe next weekend...

Dude, I HATE snakes! I found one in my garage 2 years ago, every since then I have to look around the garage floor really well before crawling under my car. Did I mention I HATE snakes!

If I ever find one IN my house, I will burn it to the ground!

Joe

General karthief · Apr 11, 2017

Snakes? Nah, but let a spider or a german cockroach touch me and I will scream like a girl!

Tom Hays · Apr 11, 2017

I did find and kill the snake. No joke, I'm 6'3, 250lbs. I had 8 years active duty Marine's and I've been in the Army for 10 years but that slimy little bastard has paralyzed me with fear. It took 5 hours to clear out the shed because every move I made was with surgical precision. I've legit had nightmares. It's ridiculous.

General karthief · Apr 11, 2017

Probably doesn't matter, he be like 'I keel youw' as he mows down the shed with a mini mac 10 or some sort of military flame thrower

5.0Droptop · Apr 11, 2017

FastDriver said:
What kind of snake?

Dead. Its the dead kind.

Mustang5L5 · Apr 11, 2017

Snakes....don't really bother me. Find them in my wood pile all the time. First thought I have is who's car I can put it in

It Was Just Hanging There

Member

wonder how much it would cost to ship you a pair

My assy trans to myself

Wasn't a pretty sight...and I've got big hands

Member

Attachments

wonder how much it would cost to ship you a pair

Member

wonder how much it would cost to ship you a pair

I leave the horn on while driving

That is…until I whipped out my Bissell

Wasn't a pretty sight...and I've got big hands

...all those nights we shared, and you're a dude??

Member

...all those nights we shared, and you're a dude??

I leave the horn on while driving

wonder how much it would cost to ship you a pair

Member

wonder how much it would cost to ship you a pair

...all those nights we shared, and you're a dude??

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency