junkyard cars

6

6lkl6l

New Member

Aug 12, 2009

11

0

1

Aug 29, 2009

#1

• Aug 29, 2009

• #1

just went to the local yard and saw a bunch of cars and trucks with either a 302 and 351's efi and carb.
im buying every thing i need to do the swap for my 4cyl. i got the 5 lug stuff and 3 18" bullit wheels of a v6 sn97 today for a 100 bucks.... wasnt expecting that lol
what are some good cars to pull a good block from? im buying alot of new upgraded parts for the motor and rebuilding it aswell but i want a decent starting point.
i found out the junkyard is ALOT cheaper here in florida than what i thought and they got alot of good stuff i can build a pretty decent ride with.

 

LarsD

Founding Member

Jul 2, 2002

2,680

119

123

Texas

Aug 29, 2009

#2

• Aug 29, 2009

• #2

I'd try and snag a 5.0L out of a late model Explorer. They came with GT40P heads and a good intake. Swap the cam and valve springs and you'll have a pretty strong 302 for cheap.

 

6

6lkl6l

New Member

Aug 12, 2009

11

0

1

Aug 29, 2009

#3

• Aug 29, 2009

• #3

theres one explorer with a 5.0 in it but there wasnt a hood and it was pretty rough lookin from sittin in the rain

 

Vinnietbird

Member

Jun 2, 2005

584

3

19

Aug 29, 2009

#4

• Aug 29, 2009

• #4

Is the intake still on it and the air intake tube?If so,it is probably water free.

 

NIKwoaC

中國製造

15 Year Member

Oct 31, 2006

5,525

943

214

Chengdu Province

Aug 29, 2009

#5

• Aug 29, 2009

• #5

Honestly, if I was building from scratch, I'd look into doing a 351. Don't know what your budget is, but its a MUCH better starting point than a 302.

 

6

6lkl6l

New Member

Aug 12, 2009

11

0

1

Aug 29, 2009

#6

• Aug 29, 2009

• #6

ya intake is still on. its got a good bit of surface rust on it tho.
theres a nice 5.0 in a lincoln town car, i dont remember what year it was but the odometer was right under 25,000. the motor is super clean, sombody just side swiped it in the rear real bad.

 

6

6lkl6l

New Member

Aug 12, 2009

11

0

1

Aug 29, 2009

#7

• Aug 29, 2009

• #7

NikwoaC said:

Honestly, if I was building from scratch, I'd look into doing a 351. Don't know what your budget is, but its a MUCH better starting point than a 302.

Click to expand...

thats what im really wanting to do its just the few i saw at the yard and the ones im finding on craigslist and stuff are pretty rough.

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

Aug 31, 2009

#8

• Aug 31, 2009

• #8

parts clean up real easy. stay away from anything out of lincoln unless its a MKVII. lincolns, mercurys, and crown vics had the Lo output motors, weak heads, and crappy pistons. go with the explorer motor. strip it down to the shortblock and get the heads/intake hot tanked. throw em back together. swap the cam for an HO cam and change the valve springs and you are ready to rock and roll.

 

NIKwoaC

中國製造

15 Year Member

Oct 31, 2006

5,525

943

214

Chengdu Province

Aug 31, 2009

#9

• Aug 31, 2009

• #9

stykthyn said:

parts clean up real easy. stay away from anything out of lincoln unless its a MKVII. lincolns, mercurys, and crown vics had the Lo output motors, weak heads, and crappy pistons.

Click to expand...

+1

 

SVT32VDOHC

waiting for the next hack atta

Founding Member

Nov 22, 2001

3,501

28

119

Motor City

Aug 31, 2009

#10

• Aug 31, 2009

• #10

Find a Mustang with a 302 motor and trans and get the whole thing with the harness and everything. You don't wanna mess with an F150 or E150 garbage, you'll prolly never get it running with that wiring. Get an actual Mustang.

 

mob

the guy who hits on his mom

20+ Year Stangneter

Oct 3, 2003

2,566

136

104

Dallas, TX

Aug 31, 2009

#11

• Aug 31, 2009

• #11

Where in florida are you?

 

lancec2c30

Member

May 14, 2008

570

0

16

Washington

Aug 31, 2009

#12

• Aug 31, 2009

• #12

Like NikwoaC said, if you have the funds to start with a 351, go that route. If you keep looking, it shouldn't be too hard to find a engine.

 

68stang351

Founding Member

May 16, 2002

850

9

39

Savoy TX

Aug 31, 2009

#13

• Aug 31, 2009

• #13

I would either go Explorer 5.0 or a 351w, 94-96 if possible.

 

90mustangGT

I felt sorry for girls because

Founding Member

Jan 15, 2002

2,773

17

89

Dallas, GA

Aug 31, 2009

#14

• Aug 31, 2009

• #14

The 351 route won't cost much more but will put out a lot more.

If you were to build both motors, the cost would be about the same, but the power output would be significant.

 

6

6lkl6l

New Member

Aug 12, 2009

11

0

1

Aug 31, 2009

#15

• Aug 31, 2009

• #15

mob said:

Where in florida are you?

Click to expand...

im near tampa in brandon.
never heard of where your at tho

 

mob

the guy who hits on his mom

20+ Year Stangneter

Oct 3, 2003

2,566

136

104

Dallas, TX

Aug 31, 2009

#16

• Aug 31, 2009

• #16

Ah true, I am just outside orlando. Got a couple junkyards around here but most arent dirt cheap or anything.

 

1993SSP

Founding Member

Sep 5, 2001

1,194

0

37

Ky

Sep 1, 2009

#17

• Sep 1, 2009

• #17

I was at a pick and pull yard near tampa years ago with my cousin, I cannont remember the name of it, all I remember is there being a SVO 4 cyl car there and as I raised the hood some guy with a Jersey accent came out of nowhere screaming the f**king hood is mine!! The f**king hood is mine!! I still laugh thinking about that guy freaking out


Parts were defintiely hella cheap compared to here in KY

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

Sep 3, 2009

#18

• Sep 3, 2009

• #18