I wussed out and had the shop that did my gears put it in. Couldn't have been that hard since he only charged an extra $20 (may have been $40) to do it. I programmed it once I got home.
I wussed out and had the shop that did my gears put it in. Couldn't have been that hard since he only charged an extra $20 (may have been $40) to do it. I programmed it once I got home.
good deal! a speedcal is on my list, but it's below the tri-ax and subframes...
just in case you were wondering where to mount it, there's a perfect spot in front of the shifter. take your console out, install it in front of the shifter, and never see it again. i know others have done this and i've seen a pic, but i don't have a link...
There is a site that has a full write-up on the install. I had a problem with one section. Do a search on the 4.6L talk/tech forums; I posted a link to the site plus a few tips.
There is a site that has a full write-up on the install. I had a problem with one section. Do a search on the 4.6L talk/tech forums; I posted a link to the site plus a few tips.