just picked up my cobra parts... a few q's

i do not need any of the abs sensors correct? i can just unbolt all of them? also on the rear setup i have all the hoses etc but do i need the dust shields or the bracket piece the dust shield connect to? i have them from the cobra but idk if i need them for the sn95 conversion. i will be buying the northracecar.com axle, brackets, cable package as well.

thanks

i guess the bracket the dust shield connects to is more like a backing plate or something.

all the cobra parts came off a 96 cobra with around 44kmi. they've been sitting for about a year so they have a little surface rust but im going to clean everything up and paint them again. i got the spindles with dust shields, rotors, calipers, brackets, lines, and bolts for the front. and the rear calipers, lines, brackets, dust shields, cross-drilled rotors, pads etc for $550. the rear rotors and pads only have about 400 miles on them so thats good. i am using 94 spindles so im going to resell the cobra spindles and abs sensor parts i guess.

heres a pic of the kit im getting from NRC