• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Kenne Bell or Vortech

  • Thread starter Thread starter ga94gt
  • Start date Start date Jun 19, 2007
  • 1
  • 2
Next
1 of 2 Next Last
G

ga94gt

New Member
May 17, 2007
138
0
0
Ringgold GA
Jun 19, 2007
#1
  • Jun 19, 2007
  • #1
I am in the market for a supercharger and it haas come down to the KB or the Vortech. I got off the phone with Anderson ford and the guy that tunes their cars said the KB realy makes a LOT of heat which kinda scares me. The reason I like the KB is because it is simple to put on and just takes a few hours.

But i have never heard anything bad about Vortech. I have always heard they make a good product.

I am just looking for some help on which on would be the best choice for my car.
Any thing would be helpful.

Thanks Garrett
 
T

tjh566

New Member
May 22, 2004
608
0
0
Northern Va
Jun 19, 2007
#2
  • Jun 19, 2007
  • #2
Depends on what you want, if you want a ton of low-end torque go with the kenne bell, its a good piece, if you want more mid-high end power go with the vortech.

Yes the KB does put out alot of heat, alot of guys go methanol injection with it which also adds like 60 hp and cools the charge down. or you can intercool it.

But with forced induction the tune is where the life of your motor comes from, even if it does put out alot of heat if you have a good safe tune you'll have no problems.
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 19, 2007
#3
  • Jun 19, 2007
  • #3
tjh566 said:
Depends on what you want, if you want a ton of low-end torque go with the kenne bell, its a good piece, if you want more mid-high end power go with the vortech.

Yes the KB does put out alot of heat, alot of guys go methanol injection with it which also adds like 60 hp and cools the charge down. or you can intercool it.

But with forced induction the tune is where the life of your motor comes from, even if it does put out alot of heat if you have a good safe tune you'll have no problems.
Click to expand...

+1
 
T

turbogt

Member
May 1, 2003
723
16
19
Montana
Jun 19, 2007
#4
  • Jun 19, 2007
  • #4
you have a 5.0.. You DON'T need a kenne bell.. You will never be able to hook it up without slicks and serious mods.. The vortech helps where the 5.0 is weakest....Top end.. Mine kicks in a little above three and pulls hard to redline.. The vortech is even simpler to install than the kenne bell minus punching a whole in the oil pan..
But, if you want the best of both worlds...... Go turbo... I am..
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 19, 2007
#5
  • Jun 19, 2007
  • #5
turbogt said:
you have a 5.0.. You DON'T need a kenne bell.. You will never be able to hook it up without slicks and serious mods.. The vortech helps where the 5.0 is weakest....Top end.. Mine kicks in a little above three and pulls hard to redline.. The vortech is even simpler to install than the kenne bell minus punching a whole in the oil pan..
But, if you want the best of both worlds...... Go turbo... I am..
Click to expand...
With good heads and the right cam and intake, the top end on a 5.0 is not a problem either.

FYI, A 2.2L kenne-bell will pull hard all the way through the red line.

If it is a street car, the KB will be more fun and feel faster stoplight to stoplight. At the track, a Vortech MIGHT get you lower times.
 
C

cbarr300

Member
Jun 6, 2006
746
0
17
goose creek, SC
Jun 20, 2007
#6
  • Jun 20, 2007
  • #6
I love my vortech. With my setup, the power really comes on at 3400-4000 so I have decent traction starting off so I'm not just sitting in one place spinning my tires. Only problem....if I downshift to 2nd or 3rd I have to be careful. Reliability wise the vortech has given me no problem at all...And also, with the meth injection kit I can run crazy timing/more boost. It was very easy to install, too.

that said....

If I had the dough I'd put a 2.2 KB on there and outfit it with a meth injection kit.
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Jun 20, 2007
#7
  • Jun 20, 2007
  • #7
Everybody has their idea of what is best
but
When it comes to traction and not being able to hook.

I don't know a Stang out there with just a little bit more power than
stock that can hook all that well in first gear :Word:

The belief that more low end torque is somehow or the other
undesirable ... is just something I can't embrace.

I want that torque for the other 4 gears I have that follow first gear

When driving around town in a street car ........... Really ..........
How much time do you spend in first gear.

My little mild NA combo will easily spin the tires in first or second
but still
I'd gladly take more low and mid range torque

I'm not putting down Centri Blowers
but
They have their applications
and
The KB's have theirs as well

Grady
 
C

cbarr300

Member
Jun 6, 2006
746
0
17
goose creek, SC
Jun 20, 2007
#8
  • Jun 20, 2007
  • #8
Good thoughts Grady. One thing to look at would be how you're gonna build your car as well. Will it be a top-end car or a bottom-end street driven car.

Me, I love top-end power which is why I went with the vortech. Making more top-end I can run a steeper gear ratio and take advantage of gearing. Of course...that's a trade-off with comfort as you'll be shifting more often.

Don't get me wrong, I love low-mid power too.....which is why I chose the parts I did.

Everyone has their preferences...the best thing I can say is......get a plan together for your car, research, research...and research some more.....and then buy. Otherwise you'll never be satisfied and will end up spending tons of money upgrading/changing things around
 

Therian

The Highlander
Founding Member
Apr 21, 2002
0
1
0
Waterloo, Ontario
Jun 20, 2007
#9
  • Jun 20, 2007
  • #9
final5-0 said:
Everybody has their idea of what is best
but
When it comes to traction and not being able to hook.

I don't know a Stang out there with just a little bit more power than
stock that can hook all that well in first gear :Word:

The belief that more low end torque is somehow or the other
undesirable ... is just something I can't embrace.

I want that torque for the other 4 gears I have that follow first gear

When driving around town in a street car ........... Really ..........
How much time do you spend in first gear.

My little mild NA combo will easily spin the tires in first or second
but still
I'd gladly take more low and mid range torque

I'm not putting down Centri Blowers
but
They have their applications
and
The KB's have theirs as well

Grady
Click to expand...

Why don't you just swap in a Diesel Grady?
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Jun 20, 2007
#10
  • Jun 20, 2007
  • #10
Therian said:
Why don't you just swap in a Diesel Grady?
Click to expand...

He doesn't want the 12" cowl hood...
 
G

ga94gt

New Member
May 17, 2007
138
0
0
Ringgold GA
Jun 20, 2007
#11
  • Jun 20, 2007
  • #11
The car will be a street car and maybe see the track 1 or 2 times a year.

As for my plans later I want to do a 306 with some AFR 165 and a nice little cam and a few more things to get it to the ground.

I was leaning to the KB because of its low end tourq and the instant boost they make.
 
C

cbarr300

Member
Jun 6, 2006
746
0
17
goose creek, SC
Jun 20, 2007
#12
  • Jun 20, 2007
  • #12
I think you'd be happy with the KB.

They produce an awesome torque curve and are really fun for street driving
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Jun 20, 2007
#13
  • Jun 20, 2007
  • #13
Get the Kenne Bell. In fact, I will bet money that with a properly tuned 2.2 Kenne Bell you'll not only run faster on the street, but faster at the track as well, running the same boost as the Vortech.

Average power is what moves a car down the track, peak power is what moves a car out of the dealership lot. 3.73s might not be the right gear for that blower though. You'd have to experiment yourself.

Don at LaSota racing has run some sick fast KB setups, see if you can shoot him a PM. Very helpful guy.

Adam
 

FlyBy763

Member
Apr 23, 2004
439
0
17
Palm Bay, FL
Jun 21, 2007
#14
  • Jun 21, 2007
  • #14
I like my vortech but if I were to do it all over again I would probably try out the KB. The only thing I dont like about the Vortech is that I have to rev it all the way up to get any power out of it. It is still a fun little car though...
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Jun 21, 2007
#15
  • Jun 21, 2007
  • #15
FlyBy763 said:
I like my vortech but if I were to do it all over again I would probably try out the KB. The only thing I dont like about the Vortech is that I have to rev it all the way up to get any power out of it. It is still a fun little car though...
Click to expand...

Jon

Thanks for your participation in this discussion

I'd like to ask you a Q or two about your experiences with your Vortech

How much total boost do you see

If you are in a higher gear like 3rd ......
at low rpm like say 1500 and go WOT .....

Please describe the experience as the rpm's climb

Like at what rpm do you JUST start to feel the benefits of boost

Maybe something like at what rpm do you see
25% of your boost
50%
75%
100%

Just looking for a more specific description of how the Vortech makes
its power ... other than ... it comes on at higher rpm's

Grady
 

FlyBy763

Member
Apr 23, 2004
439
0
17
Palm Bay, FL
Jun 21, 2007
#16
  • Jun 21, 2007
  • #16
I wish I had a way to get my dyno graph onto the computer. My peak boost is 11 psi. The boost really starts comming in at around 3000. at 4000 its at 5 psi, at 4500 its at 7.5, and 5000 its at 9. Peak is just under 6k. Peak HP is made just under 5500 RPM, peak torque is at 4000.
 

99FiveOh

15 Year Member
May 20, 2006
2,051
20
99
J-Ville, FL
Jun 25, 2007
#17
  • Jun 25, 2007
  • #17
I'm happy with my decision on the Vortech. I never drove a KB car so I have no basis for comparison nor will I try to compare. I can just say I'm not disappointed with my S trim. I can blow the tires away in first and second gear and 3rd if I'm not careful!! I'm seeing 15psi on the high side so it makes the car all that much funner.

Another thing with the Vortech is, if you hear/feel signs of trouble, you have a chance to get out of it before instant and certain damage accurs, with a KB, full boost comes swiftly so once you know you're getting into trouble, it's too late. I see alot of blown HG threads associated with KB's and Turbos.
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 25, 2007
#18
  • Jun 25, 2007
  • #18
FlyBy763 said:
I wish I had a way to get my dyno graph onto the computer. My peak boost is 11 psi. The boost really starts comming in at around 3000. at 4000 its at 5 psi, at 4500 its at 7.5, and 5000 its at 9. Peak is just under 6k. Peak HP is made just under 5500 RPM, peak torque is at 4000.
Click to expand...

if you can send me the numbers, i can make a graph in excel and post it.

or post the numbers here and grady will probably beat me to it

let me know
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 25, 2007
#19
  • Jun 25, 2007
  • #19
heh, who needs a blower? just build a 410 ... that gives instant torque too!
 

S351Saleen77

Member
Jun 27, 2002
423
0
16
Washington
Jun 25, 2007
#20
  • Jun 25, 2007
  • #20
I have had both, it just depends what you want. They both are great! It's one of the must have's once you drive them!

One thing I wanted to say about the Vortech when you are not making boost. As soon as you floor it the bypass valve closes so ALL the air from the blower is going into the engine......even though your gauge is not showing boost it still feel's stronger than N/A since the engine is not having to "suck" the air in.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
854
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
627
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
990
Drivetrain Parts Sep 7, 2026
AeroCoupe
G
Supercharger Options 5.4 32V Intech
  • Germangazguzzler
  • Apr 19, 2025
  • Other Auto Tech
Replies
4
Views
1K
Other Auto Tech Apr 23, 2025
RaggedGT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?