• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Last owner was an idiot...how hard and how to fix?

  • Thread starter Thread starter Timmey9
  • Start date Start date Jun 20, 2004
T

Timmey9

Member
Jun 9, 2003
112
0
17
Jun 20, 2004
#1
  • Jun 20, 2004
  • #1
So the last owner of my stang decided to torque down 2 of the lugnuts one one of the tires until it stripped the lug nut and bolt.

So what do i need to fix it? Can i nab some parts from the junkyard from a 4 cylinder?

How do i go about fixing it?

Anyone else have to find pervious owners mistakes to fix?

This guy wasn't a welder.....weld bead on the exhaust on it is atleast half an inch thick all around at the joints.

so why did i buy a used mustang again? so i could fix the dumb stuff they screwed up?

bah just getting tired of finding more and more stupid stuff gone wrong

of so help me fix this if you can
 

Starscream88

New Member
Mar 8, 2003
1,277
1
0
Park Ridge NJ
Jun 20, 2004
#2
  • Jun 20, 2004
  • #2
You can just buy wheel studs and a new bolt at any parts store
cost around $4-5 for the stud and nut

You need an airgun and a few washers to install the new stud,
and a BFH to get the old one out,
no more than a 10 min job
 

hemi_fan

Active Member
Apr 8, 2004
279
3
28
Ontario, Canada
Jun 20, 2004
#3
  • Jun 20, 2004
  • #3
or u could rethread the old one... I had a warped nut, and it screwed up the threads on one of my bolts. but a nice guy at Speedy rethreaded it and gave me a new lug-nut for free when my dad took it in cuz the brakes fell apart. lol
 

FrdMustangCpe

New Member
May 27, 2004
493
0
0
Sin City, NV
Jun 20, 2004
#4
  • Jun 20, 2004
  • #4
I had some problems with both of my stangs. on my 69 the front end was from three different cars, rear was from a pinto, he drove around w/ no air cleaner ( ). my 87 supposidly had a 4cyl 5speed, drilled for the hood pins to close in twords the radiator so hood prop rod doesnt fit.(cervini 1.5" cowl, and im sure there is other stuff i just havent found yet. So my next stang will be from an original or second owner, and bone stock. then hopefully i will have less problems.

blasted previous owners
 

joncash

just high enough to be functional
Founding Member
Dec 9, 2000
756
4
39
The USA's peen
Jun 20, 2004
#5
  • Jun 20, 2004
  • #5
Front or back? If you mean the back, yeah the axleshafts from a four banger are the same as a v8's. On the front the rotors are different depending on the year. You could just get a new rotor from a parts house...
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
E
Possible dummy questions about Terminator X tuning
  • Ethereal_Zer0
  • Apr 6, 2024
  • Digital Self-tuning Forum
Replies
3
Views
2K
Digital Self-tuning Forum Jul 27, 2024
CAMTWO1070
H
Hello all from my shop, Tod/ Tods Hot Rods, located in Moorpark CA 93021. Longtime 25 Yr Restoration/Performance Shop and Custom Builder Owner. Tod
  • Hot Rod Tod
  • May 28, 2024
  • The Welcome Wagon
Replies
2
Views
1K
The Welcome Wagon May 28, 2024
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?