LED light for windsheild washer

The cowl piece that the winshield nozzle is mounted in is attached by about 4 screws that are easily visible from top down. If I remember correctly, the nozzle its self is pretty snug up against the bump in the cowl, but you could probably get a screw in there if you countersync'd properly. Once again if I remember correctly, the bumps in the cowl are hollow, so you could put something in one of those. Alternatively, if not going to drive your car in dodgy weather, you can take the nozzle out (also suggest plugging the hose) as it just snaps in. I had to take the cowling off my 85' a couple of years ago to change the nozzle, so I hope I am remembering everything correctly, and that it helps.