Let the fun begin!!! PICS

BrianV · Dec 21, 2004

Hey all.. back from germany again, got home to a bunch of goodies waiting to be installed. Had a very productive day, dropped all the old front suspension off, including the K-member.. dropped the old exhaust manifolds, and put on the CC plates and put together the Coilovers.

Just waiting for the new gaskets to arrive to put on the the Longtubes

Also tore off the supercharger and all inlet piping.. sending the pipes in to get them Jet-Hot coated for some bling bling, and sending the blower to vortech to get rebuilt and upgraded to a T-trim, in preparation for the new motor rebuild

Oh yeah and I've spend plenty of time oogling my roomate's new yellow Cobra

Just figgured I'd say whatsup.. cant wait to get together with some of you guys again soon!

Tylerb59 · Dec 21, 2004

You suck!

F150Mustang · Dec 21, 2004

Looks like fun, your roommates car looks awesome!!!

The Factor · Dec 21, 2004

Nice!!!! thats gonna rock, looks sweet!!!! the yellows pretty nice too

tarch · Dec 21, 2004

ogm that's nice...

let me know how that k member goes

281pony · Dec 21, 2004

thats an mm k-member and what kind of coilovers?

let us know how the install/quality is. im looking to do that next to my car and maybe hit the track this summer. especially after i just lightened up my frontend and gained an inch in height

SMOKEDYA · Dec 21, 2004

brian are your cobra rims a slight off set? they look like they have a slight dish to them? if so where did you get them? aren't they 10.5's out back? peace

john

Jon · Dec 21, 2004

Looks good Brian. You picked the easiest time to add headers (when the K member is out).

BrianV · Dec 21, 2004

Thanks for the replies...

The K-member and A-arms are PA racing.. I'll report back on the fit, everything I've heard says its good stuff. The coilovers are MM. My wheels are just plain jane Cobras, yeah the backs are 10.5". The yellow one has 9" with 1" spacers out back.

BrianV · Dec 21, 2004

Jon said:
Looks good Brian. You picked the easiest time to add headers (when the K member is out).

Yeah, it kinda all added up.. wanted to do K-mem, but figgured I'd wait for headers.. then had to do A-arms, coilovers, Tie rod ends, end links, CC plates, etc.. just figgured I'd do it all while the blower was off for a couple weeks.

Plus it's rainy outside and the Cobra melts in the rain

Jon · Dec 21, 2004

BrianV said:
Thanks for the replies...

The K-member and A-arms are PA racing.. I'll report back on the fit, everything I've heard says its good stuff. The coilovers are MM. My wheels are just plain jane Cobras, yeah the backs are 10.5". The yellow one has 9" with 1" spacers out back.

You'll like the fit of the PA k member. We try to stick with those if it is our choice. We've tried about every one out there and so far the PA has fit the best.

BrianV · Dec 21, 2004

Jon said:
You'll like the fit of the PA k member. We try to stick with those if it is our choice. We've tried about every one out there and so far the PA has fit the best.

Sweet...

Man, just got started on the longtube install today....... PAIN IN THE ASS!

Got pass side hung so far, the thing fits in there so tight, it tries to tweak the bolts and cross thread everything. Had to run a tap through one of them to get it straightened back out, luckily that worked. Just need to tighten that side down and then start on the drivers side. Spent a good deal of time getting a fitting welded on for my EGT gauge.

Taking a rest for tonight, will resume tomorrow.

Jon · Dec 21, 2004

Just think about trying to do it with the K member still in.

ironmedic · Dec 21, 2004

hey brian i havent met u yet! i work over in silver! i used to have a red cobra but moved on to something i needed LOL! i met cavallo, he worked with me for a few days over there. hope to see u around! my wife works over in blue as a jet girl! see ya!

Bobbys97R · Dec 21, 2004

AHHHHHHHH your the guy with the black cobra on base the gate guard ask me if I knew you today said you were talking some smack hey did you have a black SN95 V-6 if so i think I met you at the car wash awhile back I didnt have either one of my cobras then I was in my 95 GT red vert.

BrianV · Dec 22, 2004

Bobbys97R said:
AHHHHHHHH your the guy with the black cobra on base the gate guard ask me if I knew you today said you were talking some smack hey did you have a black SN95 V-6 if so i think I met you at the car wash awhile back I didnt have either one of my cobras then I was in my 95 GT red vert.

Yeah.. I used to have a black V-6. Don't remember talking smack though.. the gate guards DO usually oogle at my car though

Darkhorse845 · Dec 22, 2004

Looks like fun! Both your rides look awesome! LOL and clean your
garage!

YardSpecial · Dec 22, 2004

Looks SWEET !!!

loud 95 · Dec 23, 2004

Definitely let everyone know how that install goes. I already have the longtubes, but have to do my k-member, a-arms, front coil-overs, cc plates, upper/lower control arms, rear coil-overs, sub-frames, driveshaft loop and shocks/struts. The biggest pain will be the upper/lower torque boxes... I will probably wait until I gut the rear end this spring. Anyway, good luck!

Let the fun begin!!! PICS

BrianV

Tylerb59

Banned

F150Mustang

New Member

The Factor

New Member

tarch

My 8V > 4V > 2V

281pony

Active Member

SMOKEDYA

Jon

BrianV

BrianV

Jon

BrianV

Jon

ironmedic

New Member

Bobbys97R

New Member

BrianV

Darkhorse845

Banned

YardSpecial

New Member

loud 95

New Member

Similar threads

Let the fun begin!!! *PICS*

Banned

New Member

New Member

My 8V > 4V > 2V

Active Member

New Member

New Member

Banned

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency

Let the fun begin!!! PICS