Lets see them wheel and brake upgrades

[GroverDill]

98 Cobra's with Brembo's

Standard Cobra rears

Currently have the 10th anny Cobra wheels

Don't like the 03 wheels, will be selling and going back to the 98 Cobra wheels.

 

[Prime Lord]

Are you using the 10th anniversary cobra brake kit front and rear? And if so what year of spindles do you have up front?

I'm running the same setup, and I just used regular plain old '95 spindles. Nothing special. BTW, will try to have pics this weekend.

Damn Grover...Car is looking clean as hell. Just like always.

 

[hemi_fan]

What's the difference between Mach 1, Bullitt, and Cobra brakes? Thinking of upgrading this summer... Right now im running stock 95 GT stuff:

 

[Chuckman]

What's the difference between Mach 1, Bullitt, and Cobra brakes?

color. supposedly the 03+ cobra front calipers have a slightly bigger piston, other than that its the same hardware front and rear.

 

[Kabuki_notch]

98 Cobra's with Brembo's

Don't like the 03 wheels, will be selling and going back to the 98 Cobra wheels.

Grover, been a long time, how's the car coming is the motor done? id love to see some pics.

 

[GroverDill]

Ran into some problems with the heads, they are being repaired. Little wire hiding since the motor is out

Soon the 363 Dart/205/Canfield intake/GTS-76/Weldon fuel system/sumped tank/Viper trans/built 8.8/MM full suspension (minus T/A) will be making some power

800 or more boost!

 

[gruvee87vertgt]

Real nice everyone...here's mine,...cant really see it but you get the picture...


View attachment 353202


dam...thats a bad picture...my bad..

 

[Kabuki_notch]

Ran into some problems with the heads, they are being repaired. Little wire hiding since the motor is out

Soon the 363 Dart/205/Canfield intake/GTS-76/Weldon fuel system/sumped tank/Viper trans/built 8.8/MM full suspension (minus T/A) will be making some power

800 or more boost!

sick cant wait to see it, is rick building the engine?

 

[GroverDill]

Yup Rick did the motor. It should be done by Christmas.

 

[Shakerhood]

Yup Rick did the motor. It should be done by Christmas.

Sounds like a Nice Christmas Present!!!

 

[Paisu]

Has anyone used these wilwood or baer kits to ''early'' fox (mine=82) spindle, which uses 9.15'' or 10'' rotors?
For instance, with wilwood kit, you need to modify the 87-93 spindle: cutting the caliber-brackets off.
Anyone used these kits on NOT87-93 spindle?
I'd appreciate your info, if someone has any.
It's hard to find sn95 or even 87-93 spindles in here where i live.

Edit: Or which kits has a new spindles in it? I'm aware of Ford Racing kit, but whatabout wilwood, baer, ssbc?