• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Lifter Noise

  • Thread starter Thread starter 66overhaul
  • Start date Start date Sep 2, 2008
6

66overhaul

New Member
Feb 22, 2007
22
0
1
Sep 2, 2008
#1
  • Sep 2, 2008
  • #1

Hi:
I have what I think is lifter noise. My question is, how can I tell the cause/ remedy? I have a 66 coupe with a 289 and AT.

I did not have the noise until I added a new Holley 4-barrel carburetor and Edelbrock manifold. I would like to think I could resolve it by replacing the manifold gasket, but if I do that and it does not do the trick I have wasted quite a bit of time and a little money. I pulled spark plug wires, one at a time, until the noise stopped.

Any thoughts?

Thanks
66overhaul
 

enferno

Member
Jun 20, 2006
418
2
16
Sep 2, 2008
#2
  • Sep 2, 2008
  • #2
try some marvel mystery oil.

change your oil, and add 4 qts of regular oil and one qt of this stuff.

i've also heard ATF instead of marvel, but it's a last ditch effort before you consider new lifters and a cam . .
 
T

TOM B

20+ Year Stangneter
Nov 15, 2002
872
1
16
Harrisburg Pa
Sep 2, 2008
#3
  • Sep 2, 2008
  • #3
When you pulled the plug wires one at a time and found the one that taps that tells me the valves on that cylinder need adjusted. The cylinder firing causes a push on the valve face and a loose rocker will show up, when there is no fire in that cylinder ther is no pressure on the valve face, no tap.
This probably happend because of the new parts you installed, hence you drive it harder now. adjust the valves and check the rocker studs are not pulling out of the head, stock SB heads had pressed in studs, exept the Hipo 289 had screw in studs.
 
6

66overhaul

New Member
Feb 22, 2007
22
0
1
Sep 3, 2008
#4
  • Sep 3, 2008
  • #4
Thanks for the feedback. I'll try both: First the oil change.

66overhaul
 

enferno

Member
Jun 20, 2006
418
2
16
Sep 3, 2008
#5
  • Sep 3, 2008
  • #5
he makes a good point.

i'd do the rocker arm adjustment first, then oil change if it doesn't go away.
 
6

66overhaul

New Member
Feb 22, 2007
22
0
1
Sep 3, 2008
#6
  • Sep 3, 2008
  • #6
Thanks

Thanks for the feedback.

66overhaul
 
6

66overhaul

New Member
Feb 22, 2007
22
0
1
Sep 10, 2008
#7
  • Sep 10, 2008
  • #7
Thanks for the response to my lifter noise. It was perfect! While i had the cover off I checked the other rockers and had to make several adjustments. It was fast and easy, and best of all it worked.

Thanks again.

66overhaul
 
You must log in or register to reply here.

Similar threads

H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
418
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
R
New Member, needs help with built '04 engine
  • rollo19
  • Aug 6, 2025
  • The Welcome Wagon
Replies
1
Views
175
The Welcome Wagon Aug 6, 2025
Noobz347
D
66 Coupe Progress Thread
  • DTCRAWLEY
  • Apr 19, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
43
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Jun 17, 2026
DTCRAWLEY
D
D
First post 289 rebuild question!
  • Ddyer2868
  • Nov 24, 2025
  • Classic Mustang Specific Tech
Replies
3
Views
311
Classic Mustang Specific Tech Dec 5, 2025
rednotch
F
Best plugs for carb'd roller
  • forango
  • Nov 21, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 2, 2025
HotFox
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?