lighter drive shaft

An aluminum driveshaft is about 50% lighter than the steel one. That makes your car lighter. More importantly, it's less mass that has to be rotated by the engine. It won't give you a difference that you'll really notice in the SOTP, but any reduced rotating mass is good.

The reduced vibration is especially important if you want to up your rear gear ratio.
 
I'd counter that the Alum DS has a greater diameter than the stocker. Ergo the Moment is shifted, negating some of the absolute rotational-weight-loss benefit.

I'd also consider one for vibes but not for performance (though some swear they got a tenth by installing one).

Good luck.
 
TRWXXA said:
An aluminum driveshaft is about 50% lighter than the steel one. That makes your car lighter. More importantly, it's less mass that has to be rotated by the engine. It won't give you a difference that you'll really notice in the SOTP, but any reduced rotating mass is good.

The reduced vibration is especially important if you want to up your rear gear ratio.
my steel driveshaft weighed 20 lbs and my aluminum driveshaft weighs 16 lbs...