In this video, Jude explains the process of installing a SVE smooth deck lid panel onto a 2010-2014 S197 Ford Mustang. This is a popular mod amongst the S197 crowd due to the problematic delaminating and fading issues with the factory deck lid
In this video, we dyno a pretty sweet 2012 gen 1 Ford Raptor with a 2.3L Roush Supercharger kit. This Raptor has other tasteful mods including a smaller 72mm upper supercharger pulley, VMP custom tune, and a Ford Racing cat back exhaust. Call us conceited, but this is about as simple and as tasteful as you can get when it comes to modifications for a gen 1 Raptor.
Upgrade the motor mounts on your 5.0 or 5.8 engine-equipped 1984-1995 Mustang with these updated premium polyurethane motor mounts from industry leader Special Vehicle Equipment®! Supplied in this kit are two heavy-duty urethane motor mounts, along with 5.0 Resto's motor mount hardware kit, to keep everything securely in place.
SVE spent a lot of time perfecting this motor mount kit with improved insulation from noise, reduced vibration, and less harshness compared to the previous version. You'll experience a mount that's stronger than rubber mounts, and won't rattle your teeth like solid mounts. This was achieved with an updated 80 Shore A durometer, polyurethane compound bushing that offers higher resistance to oil soak, and can withstand extreme underhood temperatures associated with performance-oriented setups. Each of these bushings is wrapped in a thicker 1/8" reinforced steel finished in a yellow Zinc coating that protects from rust and corrosion for extended service life. This results in a heavy-duty mount that withstands harsh conditions while reducing deflection and engine flex.
*Vehicle Fitment*
Model: Ford Fox Body & SN95 Mustang
Year Range: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
*Torque Specs*
Engine Mount to K-member Nut: 94 lb-ft
Engine Mount to Block Bolts: 55 lb-ft
Transmission Crossmember Nuts: 30 lb-ft
*Chapters*
00:00 - Video intro & explanation.
00:40 - Changes & revisions to the new mounts.
02:38 - SVE motor mount overview.
04:55 - Fitment notes.
05:48 - Remove the existing driver side the motor mount.
06:50 - Install the new SVE motor mount.
08:05 - Final thoughts & outro.
In this video, the LMR crew talks about the procedure of repairing the lower section of the core support on a 1999-2004 New Edge Mustang. This process and technique can also be used for Fox Body and SN95 Mustangs as well.