LMR Youtube Channel

Carb vs EFI on the Dyno! Which Makes More Power? | Project Blue Collar


View: https://www.youtube.com/watch?v=En_LeOif8xQ


Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

*Product Links*
Holley Terminator X Fox Body Kit: https://lmr.com/item/HLY-550937F/mustang-fox-body-holley-terminator-x-efi-kit-87-93
SVE Terminator X IAC Upgrade Kit: https://lmr.com/item/LRS-9715-HLY/mustang-terminator-x-idle-air-control-motor-upgrade-86-95
SVE Integration Harnesses: https://lmr.com/products/79-93-Mustang-Computers-Controls
SVE Aluminum Screen Mount for 3.5" Holley Screen: https://lmr.com/products/79-93-Mustang-Computers-Controls
SVE Fuel Systems: https://lmr.com/products/mustang-fuel-system-upgrades-79-93
Fox Body Mustang Intake Manifolds: https://lmr.com/products/79-93-Mustang-Intake-Manifolds-Components

*Watch*
Carb to EFI | Terminator X Install:
View: https://youtu.be/yNzJISkJZAw

Blue Collar Before Dyno:
View: https://youtu.be/nhVyYb5_ztA


*Relative Dyno Information*
- Unknown Short Block, Cam, & Heads
- Holley Terminator X
- Edelbrock Performer RPM II Intake Manifold
- Underdrive Pulleys
- Aftermarket Cold Air Kit
- Long Tube Headers
- Free Flowing H-pipe
- Dumped Exhaust
- T5 Transmission (Pull was made in 4th gear which is 1:1)
- Aluminum Driveshaft
- 3.73 Rear Gear
- 17” 5.0 Resto 1993 Cobra Style Wheel w/ 275/40/17 Tire
- 93 Octane
- Custom Tune

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #foxbody #dyno
 
How To Install LMR Amber Tail Lights w/ Plug-n-Play Harness (1999-2004 Mustang)


View: https://www.youtube.com/watch?v=KCpLa3X-xac


Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | https://lmr.com/page/lmr-install-video-disclaimer

Upgrade your 1999-2004 Mustang with LMR amber tail lights. This guide shows you how to complete the installation and wiring.

Updating the rear lighting on a New Edge Mustang provides a classic aesthetic. This video walks you through the step-by-step process of installing your new LMR amber tail lights using the provided plug-n-play harness. We demonstrate how to properly connect the taillight harness to the adapter harness to ensure a clean, reliable integration with your factory electrical system.

Whether you are refreshing a worn-out setup or customizing your exterior, this guide covers the tools and techniques needed to get the job done right. We focus on the specific wiring steps to ensure your turn signals and brake lights function correctly after the upgrade.

*Product Links*
99-04 Mustang LMR Amber Tail Light Kits: https://lmr.parts/94-04-Mustang-Taillights-3rd-Brake-Light
99-04 Mustang Exterior Lighting Parts: https://lmr.parts/94-04-Mustang-Exterior-Lighting

*Watch*
LMR Amber Tail Light Overview:
View: https://youtu.be/ZT0atvcnZso

99-01 Cobra Front Bumper Overview & Install:
View: https://youtu.be/tWm1lMyPrSw


*Vehicle Fitment*
Make: Ford
Model: Mustang
Chassis: New Edge
Year Range: 1999, 2000, 2001, 2002, 2003, 2004

*Torque Specs*
Tail Light Nuts: 53 lb-in (Hand tight.)
Dash Bolts: 80 lb-in (Hand tight.)
Steering Column Nuts: 12 lb-ft

*Chapters*
00:00 - Intro & component explanation.
02:16 - Disassemble trunk panels.
03:34 - Disconnect the negative battery cable & install the adapter harness.
05:01 - Install the bulbs & tail light harness.
07:19 - Depin the wire under the dash & install the relay.
09:42 - Install the amber tail light & check for operation.
10:28 - Final thoughts & outro.

*Social*
YouTube: https://www.youtube.com/user/latemodelrestoration
Facebook: http://www.facebook.com/latemodelresto
Instagram: http://instagram.com/latemodelresto
TikTok: https://www.tiktok.com/@latemodelresto

#lmr #newedgemustang #newedge