looking for a good combo

[88 5.0]

ok i have recently been able to get my hands on a 88 5.0 stang form my brother i'm looking to hop it up a little bit. know i'm looking for a power range of idle to 55-6k was wondering if any one had any good recomandations and what to do?what do use? i'm looking to do new intake,heads,injectors,exahust,cam,vavle train. i'm new the whole 5.0 thing i know quite abit about cams just would like to know if you guys had any good experiance with a certin cam/ combanation. this will also be a street/strip car mostlikly a daliy driver but i still wanna burn some rice

thanks
-jesse-

 

[Daggar]

Welcome aboard!

Give the search function a shot. Key words:

Stroker
h/c/i
supercharger
blower
combination
crate motor
long block

That should give you enough to read up on for the next week or so.

 

[darthcual]

Trick Flow makes a kit with H/C/I all together. While i'm not a fan of their intakes, if i had the coin i would probably do this.

 

[Lyncher]

Trick Flow makes a kit with H/C/I all together. While i'm not a fan of their intakes, if i had the coin i would probably do this.

Yeah they have 2 kits... the street heat kit and the track heat kit. I believe the street heat is more geared towards low end torque while the track heat is geared towards top end hp... I could be wrong though You can get them for summit, both kits are the same proce (around 2,000) and I have heard great results from both kits! It is rated at 350fwhp ...people here have put down anywhere between 270rwhp (on an old ass block) up to around 311rwhp (on a newer block)

 

[CoupedUp]

Trick Flow makes a kit with H/C/I all together. While i'm not a fan of their intakes, if i had the coin i would probably do this.

Street heat.

Plus a FRPP maf swap.

Ps- Y zit callin' me an ol' dik below my screen name?