• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Looking to finally buy a 5.0...is this one modded ok?

  • Thread starter Thread starter joey0480
  • Start date Start date Jul 12, 2011
J

joey0480

New Member
Sep 29, 2008
6
0
0
Hightstown, NJ
Jul 12, 2011
#1
  • Jul 12, 2011
  • #1
Hey guys,
I have been on here occassionally, reading and what not. Been wanting to buy a mustang for years but the marriage, baby, house, you know.........

But first off...is this is in the wrong forum, please feel free to move. I think it is in the correct area.

Anyways, I found one that I am going to look at and wanted to know advice on it.....like is what has been done good?

Also, just wondering what to look out for. And then I have to figure what to offer! I really want to get a mustang into the 12's and have it as a strip car with the occassional one day a week driver. I found this one local and the guy seems to want to negotiate. I plan on going to look at it this week and asked about a test drive and he is said it is neither registered nor insured so he is not keen about it. But I think we can agree on a few blocks, hopefully, cause I won't buy without a test drive.

It is a 1988 mustang GT.
The engine has been bored over to be a 308 with new pistons that has not been driven yet. It is a 5 speed with new clutch, flywheel, pressure plate, throw out bearing.
It has trickflow heads, ARP head studs, Scorpion Roller Rockers, 24lb injectors, and GT 40 upper and lower.
Also has new BBK equal length shorty headers, catless X-pipe, subframe connectors, new water pump, power steering pump, alternator, power steering brackets, walboro 255 fuel pump, 31 spline strange axles, eaton posi, and 4:11s.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Jul 12, 2011
#2
  • Jul 12, 2011
  • #2
The mods are fine. Though I find it pretty odd that he did all that work and hasn't even driven it yet.
 

wht93gtEd

Active Member
Nov 11, 2004
0
9
29
Jersey Shore, New Jersey
Jul 12, 2011
#3
  • Jul 12, 2011
  • #3
it's kind of weird to do work like that and not drive it. When I finish something, it's break-in, and drive pretty much while the fluids are still being filled; if you know what I mean. the shear excitement alone.

generally, when something breaks, people rebuild & sell right away to get the "headache" of their plate and make it someone else's problem. Honestly, without seeing the car and just making an internet decision, I wouldn't buy it. But maybe not and it never hurts to check it out. Make sure when you go its not all warmed up either.

personally, if it were me, i'd spend a little extra for a close-as-you-can to stock car as possible because I know the quality when I do the work.
 
J

joey0480

New Member
Sep 29, 2008
6
0
0
Hightstown, NJ
Jul 12, 2011
#4
  • Jul 12, 2011
  • #4
wht93gtEd said:
it's kind of weird to do work like that and not drive it. When I finish something, it's break-in, and drive pretty much while the fluids are still being filled; if you know what I mean. the shear excitement alone.

generally, when something breaks, people rebuild & sell right away to get the "headache" of their plate and make it someone else's problem. Honestly, without seeing the car and just making an internet decision, I wouldn't buy it. But maybe not and it never hurts to check it out. Make sure when you go its not all warmed up either.

personally, if it were me, i'd spend a little extra for a close-as-you-can to stock car as possible because I know the quality when I do the work.
Click to expand...

thanks. I complete appreciate it. I am taking my cousin with me to give it a look (he is on his third mustang which is an 11). BTW...nice avatar...I got a 2010 ram.......
 
J

joey0480

New Member
Sep 29, 2008
6
0
0
Hightstown, NJ
Jul 12, 2011
#5
  • Jul 12, 2011
  • #5
car does need coolant hoses and needs to be timed (tuned I assume)
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jul 12, 2011
#6
  • Jul 12, 2011
  • #6
If it has the stock 8.8 rear it will have 4:10's, not 4:11's
 

KHibbs

Member
Jan 11, 2011
41
0
6
Boston, MA
Jul 13, 2011
#7
  • Jul 13, 2011
  • #7
There certainly is a trade off with purchasing a "project" that is yet to be finished.

If it is running, driving, and all the bugs are worked out they may want more money.

If you can 100% confirm that he is selling what is advertised (rebuild, pistons, etc...) then it will be your call to if you want to try for a lower purchase price knowing full well that you are going to have some bugs to work out if it isn't even running.

Personally - If you really like the car, I would work out a deal where he at least gets it running to the point where you can take it around the block to verify that the engine runs strong and it shifts ok. If it's a take it "as is" then you need to verify the parts and throw your lowest offer assuming a number of unexpected little things.

Just my $0.02 and take some photos if you check it out in person.

K
 
J

joey0480

New Member
Sep 29, 2008
6
0
0
Hightstown, NJ
Jul 13, 2011
#8
  • Jul 13, 2011
  • #8
I appreciate this advice. Something as small as coolant hoses are missing.....which is a concern. No way I would pay 5K for something like this right now. I will take a look tonight and gauge it out. I mean it needs a tune and if anything, I might get to drive it a block.

KHibbs said:
There certainly is a trade off with purchasing a "project" that is yet to be finished.

If it is running, driving, and all the bugs are worked out they may want more money.

If you can 100% confirm that he is selling what is advertised (rebuild, pistons, etc...) then it will be your call to if you want to try for a lower purchase price knowing full well that you are going to have some bugs to work out if it isn't even running.

Personally - If you really like the car, I would work out a deal where he at least gets it running to the point where you can take it around the block to verify that the engine runs strong and it shifts ok. If it's a take it "as is" then you need to verify the parts and throw your lowest offer assuming a number of unexpected little things.

Just my $0.02 and take some photos if you check it out in person.

K
Click to expand...
 

Beasty306GT

Active Member
Dec 19, 2002
671
4
28
Oxford,Mass
Jul 13, 2011
#9
  • Jul 13, 2011
  • #9
personally i would not buy it..sounds like he trying to hand down a headache to the next guy
 

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Jul 13, 2011
#10
  • Jul 13, 2011
  • #10
My advice, save that 5K and wait for something better. Trust me it may look good now, but next month there will be another that looks even better. Also, pictures are worth a thousand words. Anyways, your money good luck.
 
9

91foxbod50

Member
Sep 26, 2007
486
0
16
Jul 13, 2011
#11
  • Jul 13, 2011
  • #11
Just buy a roller for 400-800 and take the 4 grand extra and build your own. Go to a junkyard and get a 5.0 with all the accessories and pay someone to do the block work and you can assemble it. At least you'll learn something in the process.

Window shopping never hurts, at least you can make a thread on here and people will take it seriously. They will all point you in the right direction, youll get the best bang for the buck when people with years of experience give you there .02.

And its never a good idea to spend all your savings on a car. Especially a mustang.....
 
J

joey0480

New Member
Sep 29, 2008
6
0
0
Hightstown, NJ
Jul 13, 2011
#12
  • Jul 13, 2011
  • #12
Thanks guys,
I appreciate the honesty. I am going to look at it with two friends tonight (both who own mustangs and one who knows his stuff...at least I think) and gauge it out.

I think this is going to come down to "how low will he go"

Parts and all sound good, but how it runs and all is a different story. 5K is way too much for this. I gotta see what he would be willing to let it go at and then weigh out the potential hazards.
 
9

91foxbod50

Member
Sep 26, 2007
486
0
16
Jul 13, 2011
#13
  • Jul 13, 2011
  • #13
post some pix, make sure you bring a flashlight. and if i were you id go to autozone and pick up a compression tester so you can test all the cylinders. just make sure you confirm that its okay with the seller.

I always bring

Flashlight
Compression tester
Coolant pressure tester
Jack with 2 jackstands
Tool Kit
Test Light
ohm meter
pry bar
and a piece of cardboard lol

Be carefull and best of luck
 
J

joey0480

New Member
Sep 29, 2008
6
0
0
Hightstown, NJ
Jul 13, 2011
#14
  • Jul 13, 2011
  • #14
well i saw it tonight. I would give the body and interior a 9/10. No rust, interior is immaculate considering the age.
It has no wipers, needs coolant hoses, vacuum hoses, tune up, and welding of a new trans cross member, timing adjustment, and harmonizer.
Guy would come down on price a bit he said.
 

Marks89GT

Member
May 8, 2011
128
2
19
Dudley MA
Jul 13, 2011
#15
  • Jul 13, 2011
  • #15
its nice if you can find one that is mostly stock. something that hasnt been messed with too much but those are rare today.
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Jul 14, 2011
#16
  • Jul 14, 2011
  • #16
I love buying others uncompleted projects, just look it over very closely prior.
 

srtthis

the guy doing it does every local racers rear end
15 Year Member
Jul 3, 2009
5,129
1,666
204
Maryland
Jul 14, 2011
#17
  • Jul 14, 2011
  • #17
Rick 91GT said:
If it has the stock 8.8 rear it will have 4:10's, not 4:11's
Click to expand...

haha smart ass

as for a stock one... i honestly do not believe there are any truely stock fox bodies left. didnt they all come with welds and flow masters back in the day anyway?
 
You must log in or register to reply here.

Similar threads

9
1994 Mustang GT 5.0 L Convertible
  • 94ns95
  • Jun 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
204
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 19, 2026
94ns95
9
S
1965 Mustang with 80s 5.0 engine in it Power Steering hose or connection ID?
  • spearce
  • May 19, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
113
Classic Mustang Specific Tech Jun 8, 2026
AeroCoupe
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
310
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
840
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Power steering hoses
  • Teen'93stang5.0
  • Apr 3, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
3
Views
193
1974 - 1978 Mustang II Talk & Tech Apr 14, 2026
Teen'93stang5.0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?