Lug Pattern

[69limited600]

What is the Lug Pattern for a 99-04 stang. 5x5" or 5x51/2"? And also, i am getting a pair of Cragar 342 series steel wheels for the street slicks out back; do i need different lugnuts or will the stock ones work?

Thanks- Dan

 

[CRZYHRSGT]

5x114, which comes out to just under 4.5 in.

 

[03ghoststang]

as teh post above me says its about 4.50"

 

[CRZYHRSGT]

As for the lugs, I would imagine the factory ones would be okay, the only difference being the taper where there mate up to the wheel. Whoever you get the wheels from should be able to tell you, if not Cragar should

 

[Ronald Jones]

It's actually 5X114.3 mm, which is exactly 4.50 in., the center bore is 70.3 mm.

 

[BooWFO]

5 x 4.5
lugnuts are 1/2 20's not sure on your wheels but some cragar's take the shank style lugnuts.
CragarLugnuts

 

[69limited600]

Thanks guys, http://www.jegs.com/webapp/wcs/stor...10001&categoryId=20989&parentCategoryId=36662
It shows a pic of the required lugs. dunno if that would be stock or not