• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Mac Prochamber

  • Thread starter Thread starter RedStangGt99
  • Start date Start date Sep 13, 2004
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
R

RedStangGt99

New Member
Jul 21, 2004
19
0
0
NY
Sep 13, 2004
#1
  • Sep 13, 2004
  • #1
Will the Prochamber really deepen up the tone of my exhaust, I want a real deep muscle car sound but i dont want to go the no cats route. Will I have a problem passing emissions with the prochamber? Where's the best place to buy one??
 
S

sixstringthing

New Member
Aug 11, 2003
297
0
0
Sep 13, 2004
#2
  • Sep 13, 2004
  • #2
Pro chamber has no cats, there's usually plenty of shops in the bad sections of town that won't even care if you have cats or not it's still not impossible to pass emissions. There is a catted PC but it won't be much louder than stock. If you want prochamber tone with cats a High Flow H-Pipe will be very close.
 

Zinc03GT

New Member
Apr 21, 2004
241
0
0
Mass
Sep 13, 2004
#3
  • Sep 13, 2004
  • #3
The Prochamber has no cats. And from what I've heard it isn't very loud, but i don't know for sure. I've read that it has a deep tone, but not too much volume.
 
R

RedStangGt99

New Member
Jul 21, 2004
19
0
0
NY
Sep 13, 2004
#4
  • Sep 13, 2004
  • #4
oh ok, thanks for the input, any other suggestions on which h pipe to choose? which has best performance gains?
 
R

rebelstang01

New Member
Sep 8, 2004
43
0
0
Mississippi
Sep 13, 2004
#5
  • Sep 13, 2004
  • #5
I have an 01 GT w/ prochamber (no cats) and 1 chamber flows and it sounds awesome. From idle to about 3000rpm it has a loud deep mean sounding tone and after 3000rpm the tone changes slightly (not as deep) and it just starts to scream. I love it . You definitely won't go unnoticed around town. I don't know how the prochamber sounds with other mufflers. I could also tell a big difference in power. As far as emissions go the off road prochamber is not supposed to pass emissions, but I have heard some have passed anyway. If you get the off road version you will need the MIL eliminators to take SES light off. I do belive MAC has a catted version now or you could have an exhaust shop weld cats in to make it legal. I purchased mine from partshopper w/ MIL eliminators for $288.
 

40th GT

New Member
Apr 7, 2004
916
0
0
Lawrenceville, GA
Sep 13, 2004
#6
  • Sep 13, 2004
  • #6
So if I fail emmisions because of an off-road pipe, how deep in trouble am I going to be in?
 

w00t

New Member
Mar 26, 2004
334
0
0
Arlington TX
Sep 13, 2004
#7
  • Sep 13, 2004
  • #7
40th GT said:
So if I fail emmisions because of an off-road pipe, how deep in trouble am I going to be in?
Click to expand...

Check out www.mustangexhaust.com for all exhaust combos.

I have a prochamber w/ mac flowpaths, sounds bada$$ at WOT. You shouldn't have any problems passing inspection. Just make sure you pick up a pair of MIL's.
 

UVBNHAD

New Member
Aug 18, 2004
144
0
0
McCalla, AL
Sep 13, 2004
#8
  • Sep 13, 2004
  • #8
Mustangs can pass emissions without cats and have been able to do so for about fifteen years. Get the Pro-Chamber and tac weld the convertor casings around the pipe so that it looks like you have them on there. Go to a speed shop that does emissions testing and you should be fine.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 13, 2004
#9
  • Sep 13, 2004
  • #9
I had a Mac Catback with a Prochamber...(trying not to be bias)...but I think it is the best mustang I have heard?...and I'm around mustangs a lot...my friend liked it so much he is going with the exact same exhaust I had...

Make sure you get the stud for the drivers side manifold so the Prochamber can seal to the manifold...I got mine at NAPA but don't remember the part #?
 

madmatt

Ellis Juan sympathizer
Founding Member
Dec 28, 2002
465
0
16
Lexington, SC
Sep 13, 2004
#10
  • Sep 13, 2004
  • #10
Believe the Napa part number is 600-1819 but dont quote me on that for sure. My prochamber is sitting on my floor waiting for the warranty to go away so I can put it on.
 
R

RedStangGt99

New Member
Jul 21, 2004
19
0
0
NY
Sep 13, 2004
#11
  • Sep 13, 2004
  • #11
cool, i think im gonna go with the prochamber, thanks for the input guys
partshopper is the way to go???
 

SonicBlue2v03GT

New Member
Mar 24, 2004
648
1
0
You know its a Fact...San Diego is the greatest ci
Sep 14, 2004
#12
  • Sep 14, 2004
  • #12
RedStangGt99 said:
cool, i think im gonna go with the prochamber, thanks for the input guys
partshopper is the way to go???
Click to expand...

I got mine from Partshopper, got it less than a week later and that is shipping from Alabama (im pretty sure) over to San Diego. On the main forums page there is a sticky with a discount code from the owner for 4.95 shipping- use the link below if interested

Click here

My pro-chamber is sitting in my room for the moment, but am gonna put it on here in the next couple of weeks to go with my Flowmaster American Thunder Cat-Back, I cant wait

About passing smog - What I am going to do is just keep the stock H and bolt that sucker back up when it comes time to get it smogged. Im not sure your laws but in CA, you cant even play. Must have stock H-Pipe. Good Luck with your decision
 
R

RedStangGt99

New Member
Jul 21, 2004
19
0
0
NY
Sep 14, 2004
#13
  • Sep 14, 2004
  • #13
thanks for the help. ill probably keep the prochamber on come emissions time and just pay a little extra to pass if needed
 

tl75keith

New Member
Jul 20, 2004
69
0
0
Owings Mills, MD
Sep 14, 2004
#14
  • Sep 14, 2004
  • #14
I used a Prochamber with both Mac Flowpaths and 2-chamber Flowmaster for a year. It was barely louder than stock at idle but got REALLY loud at higher RPMs. The interior sound of the Prochamber "box" moving the exhaust gases around got on my nerves and went back to stock H.
 

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Sep 14, 2004
#15
  • Sep 14, 2004
  • #15
mine should get delivered today and installed by the end of the week. it is going to be mated to the slp loud mouth i currently have on.
 

propellerhead

New Member
Apr 13, 2004
1,541
0
0
"but what's with the but shots?"
Sep 14, 2004
#16
  • Sep 14, 2004
  • #16
MAC sells the Prochamber with cats.
 
R

Rocketman

New Member
Apr 20, 2004
730
0
0
SoCal
Sep 14, 2004
#17
  • Sep 14, 2004
  • #17
propellerhead said:
MAC sells the Prochamber with cats.
Click to expand...

Page 44 of the 2004 MAC Catalog shows a catted pro chamber. Part number PC9904 for 99-04 GT's.
 
N

ngjcs3

New Member
Jun 11, 2003
71
0
0
philly suburbs / state college, PA
Sep 14, 2004
#18
  • Sep 14, 2004
  • #18
tl75keith said:
I used a Prochamber with both Mac Flowpaths and 2-chamber Flowmaster for a year. It was barely louder than stock at idle but got REALLY loud at higher RPMs. The interior sound of the Prochamber "box" moving the exhaust gases around got on my nerves and went back to stock H.
Click to expand...

what do you mean by sound of "box" moving the exhaust gases around??
I am also interested in buying a Prochamber because i want something not too loud with my flowmasters. I want to be able to hear my stereo when crusing around at 2K..
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 14, 2004
#19
  • Sep 14, 2004
  • #19
ngjcs3 said:
what do you mean by sound of "box" moving the exhaust gases around??
I am also interested in buying a Prochamber because i want something not too loud with my flowmasters. I want to be able to hear my stereo when crusing around at 2K..
Click to expand...

I never noticed that sound...I had heard an offroad H pipe (though slightly louder)...did not sound as good as the Prochamber...I got a compliment every other day on my exhaust...no kidding...

Got mine from Partshopper also...got here within a week also...
 

mustangman7989

New Member
May 6, 2004
32
0
0
Sep 14, 2004
#20
  • Sep 14, 2004
  • #20
RedStangGt99 , I noticed that you live in NY. Sometime very soon they are going to be enforcing extremely strict emissions laws in New York. They will be plugging into your computer and you must pass that test. Not too sure if plugging into the computer has that much to do with having cats or not, but you might want to check that out. There isn't going to really be a way to get around it either. I have heard that they are going to say pass or fail, then scan your registration and send it to the dmv who then prints out your inspection sticker and all of the shops will have to keep records and such. There probably is a way to get around it, but will be much more difficult. I have not confimed any of this, but just wanted you to be aware that the laws are changing.
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
76
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
350
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
Tuners come on inside
  • squeak93
  • Feb 13, 2026
  • SVT Tech Forum
Replies
1
Views
258
SVT Tech Forum Feb 20, 2026
squeak93
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
734
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
R
Engine Evap and charcoal cannister leak
  • ryan1994stang
  • Mar 14, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
431
Fox 5.0 Mustang Tech Mar 18, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?