MACH door enclosure question

[Infinity]

Is the 8" door enclosure ported or sealed? Also, how much airspace does it contain?

Is the head unit a true double-DIN, to where I can place 2 singles in the space?

TIA

 

[Mxyzptlk]

The speakers in my 05 GT doors 6X8s & subs are sealed in themselves but no there is not a sealed/ported enclosure. The 8 inchers are just affixed to the door panel.

 

[Mxyzptlk]

Crazy how this is a "SHAKER" system but the speakers are imprinted MACH.

 

[zeindog]

Actually, the subs are SEALED. I took the door panels off and they are mounted into an enclosure that runs the length of the door. I plan on putting either a JL or Image dynamics 8's in there and reinforcing the door more with fibreglass and dynamat. Just by looking at the enclosure I am assuming that it is roughly .25-.35 cubic feet.

 

[Infinity]

Actually, the subs are SEALED. I took the door panels off and they are mounted into an enclosure that runs the length of the door. I plan on putting either a JL or Image dynamics 8's in there and reinforcing the door more with fibreglass and dynamat. Just by looking at the enclosure I am assuming that it is roughly .25-.35 cubic feet.

OK, I'd read that it was ported (couldn't see that happening). I think some 9Kv2's with about .5#'s of polyfill should suffice When I get mine, I'll find an exact total by removing the enclosures and checking the volume with water.