Mach 1 Mach I Exhaust Tip size?

red94fiveo · Jan 26, 2004

Just like the subject says, what is the size of the Mach I exhaust tips? I love the rolled look and was hoping to score a set from somewhere for my car. Hopefully their 2 1/2" or 3". Oh, and how far back do the tips go with the larger diameter. Thanks.

CatmanJJ · Jan 27, 2004

2.5 inches. They should have come 3.5 inches.

red94fiveo · Jan 27, 2004

Am I reading your sig right that you have a cat-back on the Mach 1? If so would you be willing to part with your old exhaust tips, cause I want them.

TR03Mach1 · Jan 27, 2004

CatmanJJ said:
2.5 inches. They should have come 3.5 inches.

You might want to run a tape measure past them again, 'cause mine measure 3" OD

34Ford · Jan 28, 2004

Ours is 3".

I just measured them last week cause I just received my Magnaflow catbacks yesterday. And Im replacing their tips with 3 1/2" rolled Magnaflow tips.
Now if it would just warm up outside.

Dennis

CatmanJJ · Jan 28, 2004

TR03Mach1 said:
You might want to run a tape measure past them again, 'cause mine measure 3" OD

I never measured them in the first place, I just figured that they were 2.5 since that's what my GTs tips were. Thanks for the correction. Weird though cause my magnaflows look a helluvalot more then .5 inches bigger then the Mach 1 stock tips.

CatmanJJ · Jan 28, 2004

red94fiveo said:
Am I reading your sig right that you have a cat-back on the Mach 1? If so would you be willing to part with your old exhaust tips, cause I want them.

Actually I'm thinkin of reusing them on my Ford Ranger if I put split exhaust on that puppy. But I'll let you know if I'm not gonna use them.

34Ford · Jan 28, 2004

CatmanJJ said:
Weird though cause my magnaflows look a helluvalot more then .5 inches bigger then the Mach 1 stock tips.

The Magnaflow tip will look bigger since their not rolled.
My Magnaflow 3 1/2" rolled tips came today, so Im going to put the ones that came with the system on Ebay.

The reason I like the rolled tips is you can see them from behind. Regular slice tips all you see is.........."hole".

red94fiveo · Jan 28, 2004

34Ford said:
The Magnaflow tip will look bigger since their not rolled.
My Magnaflow 3 1/2" rolled tips came today, so Im going to put the ones that came with the system on Ebay.

The reason I like the rolled tips is you can see them from behind. Regular slice tips all you see is.........."hole".

Will you post a link to that ebay auction? I'm interested. Thanks.

CatmanJJ · Jan 29, 2004

34Ford said:
The Magnaflow tip will look bigger since their not rolled.
My Magnaflow 3 1/2" rolled tips came today

The reason I like the rolled tips is you can see them from behind. Regular slice tips all you see is.........."hole".

What's the part# and where did you order your Magnaflow rolled tips from??

34Ford · Jan 29, 2004

I ordered the 2 1/2" inlet x 3 1/2" rolled tip.
#35113 from http://www.bestautopartsonline.com/tips3.htm

And Ill be dammed if their not right. Their actually 3" inlet x 3 1/2" rolled tip.

Way to BIG of a inlet. Their website is screwed up. And so is this place!
http://www.a-1parts.com/performance_store/magnaflow_stainless_exhaust_tip.cfm

I checked Magnaflows website and sure enough, both sites are screwed
Here is Magnaflows part numbers. http://www.magnaflow.com/02product/tips/truck.htm

As you can see the #35113 has the 2 1/2" inlet. I emailed bestautoparts and Im demanding replacment # 35114 for no additional costs. I just hope 18" is not to long.

Dennis

34Ford · Jan 29, 2004

red94fiveo said:
Will you post a link to that ebay auction? I'm interested. Thanks.

I haven't forgotten you. Now that my rolled tips are not right, I might have to use the Maganflow tips for a few days till the replacements come.
Course if it dont get any warmer, I might not be getting the Mach out.

Thank goodness its not my daily driver.

Dennis

killermach1 · Aug 30, 2004

They are 3". wish I had read your post before I took my stock exhaust off and scrapped it though the tips are welded and would require work to put on a GT.

Mustang5L5 · Sep 25, 2004

Don't the bullitts have the same exhaust tips??

Here's a set for sale on Ebay
http://cgi.ebay.com/ebaymotors/ws/e...tem=7923628579&category=33633&sspagename=WDVW

Two weeks ago, i scored a set of Mach 1 tips with less than 100 miles on them. Not a spec of soot or rust on them. They were cut about 3" after where the chrome ends so i have plenty to weld with.

Thing is, i'm not sure i want to use them. I think i want some bigger 3.5" rolled tips. If i go with those, i might be looking to sell my Mach tips

Mach 1 Mach I Exhaust Tip size?

red94fiveo

New Member

CatmanJJ

Captain Tangnet

red94fiveo

New Member

TR03Mach1

Member

34Ford

CatmanJJ

Captain Tangnet

CatmanJJ

Captain Tangnet

34Ford

red94fiveo

New Member

CatmanJJ

Captain Tangnet

34Ford

34Ford

killermach1

New Member

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Mach 1 Mach I Exhaust Tip size?

New Member

Captain Tangnet

New Member

Member

Captain Tangnet

Captain Tangnet

New Member

Captain Tangnet

New Member

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency