Main Front Crank Seal

I just did this the other day, though my engine was out of the car!

You will want to borrow/rent these two tools:

• Harmonic Balancer remover (same as steering wheel puller)
• Harmonic Balancer installer

Using those two tools for the balancer and just using a screwdriver and some elbow grease you can get that old seal out and just tap in a new seal with a rubber mallet or even better use a block of wood or steel try to hammer the seal in evenly. It's a pain sometimes it will go right in and sometimes it takes forever.

Oh and check real close once you get the balancer off, because I thought my seal was leaking too but it turned out to be the oil pan gasket right there under the timing cover was the culprit. (Good thing the motor was out of the car when I figured that out!)