The fabrication for the most part is done on this thing 
It going to relocate the MAF/filter where the smog pump used to be. Should get that crap out of sight and clean up the engine bay a lot! I'm going to smooth is all out and paint it a gloss black probably. Its held in place about 1/4" from the alt by a steel rod that goes down to the block then is bolted on. 3" pipe all the way with smooth flowing bends in it as you can see. If anyone wants me to make one for them, PM me and I'll see what we can work out. I'll have finished pictures of it tomorrow probably because I'll have to let the paint dry.
It going to relocate the MAF/filter where the smog pump used to be. Should get that crap out of sight and clean up the engine bay a lot! I'm going to smooth is all out and paint it a gloss black probably. Its held in place about 1/4" from the alt by a steel rod that goes down to the block then is bolted on. 3" pipe all the way with smooth flowing bends in it as you can see. If anyone wants me to make one for them, PM me and I'll see what we can work out. I'll have finished pictures of it tomorrow probably because I'll have to let the paint dry.
He said he'd do it for free if I bought the parts... Well I bought the $293 worth of parts, good communication for the first month but I think he was BSing me about what was done, then it slowly got harder to contact him, and now I cant even get a phone call to go through. I have his address and everything, the bill from summit/jegs for most of the parts that were shipped to his house, but since I didnt buy anything from him, and he got the parts, I dont think theres ***** I can do to get my money or parts back... it was Pete (yellow5.0cobra) btw
