Manual Trans ONLY

khendrix2374

New Member
Nov 14, 2006
25
0
0
Looking at Blowers and turbo systems, why do some of them say "Manual Transmission Only!"?

Is it a tuning issue?

Personally, I'd rather have a 3500 Stall in an automatic intead of a manual trans. I've been out of the gear shifting scene for a few years now and don't plan on going back.

Thanks
 
You also have to remember that the stock 5speed auto can't handle alot of power.

When I went with 13psi, the stock converter started locking and unlocking on the big end. Also, I have had my auto gone through with billet servos, some other stuff to be able to hold 600rwhp with reliability.
 
The reason is that the 5R55S transmission is not designed to hold that much power. It has soft bands and clutches and the input shaft is only 5/8". The 3rd gear clutch is the highest failure point. I know of lots and lots of people who have lost 3rd gear after upping the boost. The stock tranny tuning is very soft.
Kenne Bell has firmed up the shifts in their tune and I am sure the other supercharger makers are also tuning the tranny in their tunes.
Many of the supercharger manufacturers are not selling HO kits for automatics so they do not have a bunch of customers whining that their auto trannies failed after the kit was installed.
My transmission lasted 3000 miles once I was at 10 PSI. I have since replaced it with a beefed up Level 10 Stage III trans and converter. Some people have had it hold up okay but my dealer alone has had 5 cars with FI lose their trannies. I have seen countless posts on forums from S197 owners that have had issues with the 5R55S.