• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Manual Transmission Harness. W/pics

  • Thread starter Thread starter Road_Runna
  • Start date Start date Oct 11, 2012
R

Road_Runna

20+ Year Stangneter
Dec 23, 2002
594
6
39
Ogden, UT
Oct 11, 2012
#1
  • Oct 11, 2012
  • #1
Well my Aod-e is taking a nose dive for the worst. Searching through the yards I found a 94 GT manual ECU, Pedal assembly, trans harness. My question? is if this harness is usable?


My confussion, is when I compare to the ebay pics, I haven't stripped all of the black plastic shield off. But, is that white connection necessary? can I use the stock AOD-e white connection +along+
with the harness above?

Below is what ebay sells as the transmission harness (notice no white connection)


BTW, I got the harness and lower boot free of charge, ECM for $15 and pedal assem for $15?
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Oct 11, 2012
#2
  • Oct 11, 2012
  • #2
The harness you have looks to be a 6 cylinder T5 harness.
Definitely not a factory 94-95 5.0 harness.
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Oct 11, 2012
#3
  • Oct 11, 2012
  • #3
94-95 (and later years, i think) 6 Cylinder AODE and T5 transmission wiring harnesses have integrated O2 wiring.

94-95 5.0 have a separate O2 harness.

My picture, 94-95 5.0 T5 harness.


Found online, 94-95 5.0 AODE harness.


Found online, 6 cylinder T5 harness.


Found online, 6 cylinder AODE harness.


As for the wiring of your harness, im not sure.
Ive never rewired an aode or 6 cylinder harness for use on the 5.0 T5.

Others have, so im sure a search will yield the info you neeed.
 
R

Road_Runna

20+ Year Stangneter
Dec 23, 2002
594
6
39
Ogden, UT
Oct 11, 2012
#4
  • Oct 11, 2012
  • #4
I found those posts (using aode harness rewiring, etc) a couple days ago. What also troubles me is that besides having the Mustang gt imprint on the back bumper (the car I pulled the harness out of), and also having an original cut on the shifter opening (it was neatlly cut, with all for bolt holes), the harness when pulled out was attached with those plastic push pins to a bracket and other wires.



heres the pic of the ecm. I guess the harness is a lost cause.
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Oct 11, 2012
#5
  • Oct 11, 2012
  • #5
That ecm appears to be for a 96 4.6 liter.
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Oct 11, 2012
#6
  • Oct 11, 2012
  • #6
You'll want a T4M0 for a 94-95 GT T5.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 12, 2012
#7
  • Oct 12, 2012
  • #7
In a pinch, you can re-purpose the AODE harness to function with the T5. You need to bridge the starter wiring and rig up a back-up light switch connector (looks like it might be ok in that first pic - can't really see the condition of the wires where they meet the shell).
 
R

Road_Runna

20+ Year Stangneter
Dec 23, 2002
594
6
39
Ogden, UT
Oct 18, 2012
#8
  • Oct 18, 2012
  • #8
Well, what about the pedal assembly ? will that work on my 95 GT? the pedal assembly is also from the 96 mustang
GT I pulled the ecu, and tranny harness from.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 18, 2012
#9
  • Oct 18, 2012
  • #9
The cruise control switches are different IIRC. Other stuff might be off as well, but the CC thing is what I remember.
 
R

Road_Runna

20+ Year Stangneter
Dec 23, 2002
594
6
39
Ogden, UT
Oct 18, 2012
#10
  • Oct 18, 2012
  • #10
Is there a list of what is compatible with a 94-95 5 litter T5's? I found a guy selling his for $200 dollars (94-95 5.0 litter spec T5) but im wondering if a different bellhouse will work if I install the transmission while leaving the longer input shaft in?
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Oct 18, 2012
#11
  • Oct 18, 2012
  • #11
As far as i know, only a 94-95 gt/cobra bell housing will work with that input shaft.

i believe I've read that the 94-04(?) 6 cylinder t5 bell can be used, with some modifications,not entirely sure About that though.
 
R

Road_Runna

20+ Year Stangneter
Dec 23, 2002
594
6
39
Ogden, UT
Nov 12, 2012
#12
  • Nov 12, 2012
  • #12
Ok, new details and questions on my swap. Im going for the 94 95 t5 swap, I now have the T4M0 Ecu, the correct transmission harness, clutch cable used, Correct pedals, and the 5.0 Bell housing should be coming in the mail with the dust shield, clutch fork and clutch fork cover and bolts. post some new pictures of the correct stuff and not the 4.6 a little later.

so my question now is what manufacturer makes the King Cobra clutches kits?
Autozone sales the flywheel for $56 it's a 13.286 diameter, 157 ring gear tooth fly wheel. Will this work? it's made by brute force, it just seems like a good deal since everyone else wants about 70 dollars for a new one.
 
You must log in or register to reply here.

Similar threads

Mustang II 4 cyl gear hunting and possibly messed up vacuum system
  • oesterreicher
  • May 31, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
11
Views
279
1974 - 1978 Mustang II Talk & Tech Jun 14, 2026
manicmechanic007
N
Electrical 1985 CFI Wiring Harness question
  • notch351w
  • Aug 25, 2024
  • Fox 5.0 Mustang Tech
Replies
6
Views
672
Fox 5.0 Mustang Tech Aug 26, 2024
AeroCoupe
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
161
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
O
Computer swap
  • Oakman
  • Jun 22, 2024
  • The Welcome Wagon
Replies
2
Views
573
The Welcome Wagon Jun 22, 2024
Oakman
O
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
1K
SN95 Mustangs For Sale (1994-04) Apr 7, 2025
Labora
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?