Mass air swap 86-93 to 94??

[mikenstang]

Hey I was able to get a good deal on a Pro-M 77 Mass air for my 30lbs Inj's but it is for a 86-93 stang. Can it be used on my 94??? The harness plug is different but I was thinking it could be swapped if I could verify the correct wires. Any ideas??

 

[HoofnIt]

Someone jump on in and correct me if I am wrong but I think the only difference is in the housing. The 94/95 housing is flanged but I think the plug is the same. I know some guys on here that are using the fox bodied meters without any troubles.

 

[jmuva44]

Yes, you can use it!!!!

 

[VIPERn94Five-0]

yup....Joe(VibrantRedGT) uses one currently


Anthony

 

[jmuva44]

I've been using a foxbody C&L for a while now...It worked great on my '95 but my '94 doesnt like it. I think that's jsut cuz the C&Ls dont like homemade CAIs.

 

[fiveotony]

I thought the plug was different though I got a Bullett maf from pro M for 94-95 cars 30 lb injectors chrome and its not flanged? So all I have to do is get a 93 and below one and it will work????? Why do they list them differently?

 

[jmuva44]

Yes, the fox bodies should work. Mine did but I also used the stock sensor and wiring and just bolted it up to the meter.

The only difference in the meter itself would be at the bottom of the fox body meteres there are two tapped holes used to mount it to the car.

 

[fiveotony]

hmmmmm very good to know then.

 

[mikenstang]

Thanks for all the info guys. I checked the wiring schematics and it looks like all the wiring is the same so I will get a connector harness from a 93 and splice it in.