Hey everyone, I tore apart my transmission and discovered i need my 1-2 synchro replaced BAD and my 3-4 synchro looks like **** too. Along with these I am in the market for a Master Rebuild Kit. I have found a few prices but i want to know if you guys know anywhere with good prices. All information is welcome!!! I am looking for anywhere with good prices and also feel free to give opinions on where to buy from and where to avoid. Thanks all!
Master Rebuild Kit and Synchros for T-5
- Thread starter LS1Killer16
- Start date
Are you referring to the synchro sliders? Or the blocker rings or both?
The rebuild kits come with the blocker rings, but the sliders are separete hare parts.
You can try Hanlon Motorsports for the hard parts and rebuild kits.
I found a new 1-2 slider on Ebay for $35. They pop up from time to time
The rebuild kits come with the blocker rings, but the sliders are separete hare parts.
You can try Hanlon Motorsports for the hard parts and rebuild kits.
I found a new 1-2 slider on Ebay for $35. They pop up from time to time
sunil6784
Member
I'm actually looking too, I actually posted a question similar to that not too long ago. Somebody on Stangnet said that they got their's through this place....
http://cgi.ebay.com/ebaymotors/WORL...33731QQitemZ7994587268QQrdZ1QQsspagenameZWDVW
He said he used that kit and everything was just peachy
http://cgi.ebay.com/ebaymotors/WORL...33731QQitemZ7994587268QQrdZ1QQsspagenameZWDVW
He said he used that kit and everything was just peachy
See http://www.ttcautomotive.com/English/onlineorder/product.asp to download a FREE service manual for T5 or Tremec 3550
You will need the Adobe Acrobat viewer which is also a free download – http://www.adobe.com/products/acrobat/readstep2.html
See http://www.hanlonmotorsports.com/ or http://www.ddperformance.com for parts
A T5 rebuild kit with syncros, bearings and other small parts costs about $160. It does not include any gears or shafts.
http://cartapes.com also has a video on how to rebuild your T5 or Tremec. It costs less than $20, and is worth every penny of it.
I did a Tremec 3550 rebuild, and it wasn't that difficult. The video was an immense help, and I would recommend viewing it. At $20, it will give you an opportunity to look and decide for yourself if you think that it is something you want to try to do.
You will need the Adobe Acrobat viewer which is also a free download – http://www.adobe.com/products/acrobat/readstep2.html
See http://www.hanlonmotorsports.com/ or http://www.ddperformance.com for parts
A T5 rebuild kit with syncros, bearings and other small parts costs about $160. It does not include any gears or shafts.
http://cartapes.com also has a video on how to rebuild your T5 or Tremec. It costs less than $20, and is worth every penny of it.
I did a Tremec 3550 rebuild, and it wasn't that difficult. The video was an immense help, and I would recommend viewing it. At $20, it will give you an opportunity to look and decide for yourself if you think that it is something you want to try to do.
sunil6784 said:I'm actually looking too, I actually posted a question similar to that not too long ago. Somebody on Stangnet said that they got their's through this place....
http://cgi.ebay.com/ebaymotors/WORL...33731QQitemZ7994587268QQrdZ1QQsspagenameZWDVW
He said he used that kit and everything was just peachy
I just ordered my rebuild kit from them about half hour ago.
