• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Matt's Humble Fox

  • Thread starter Thread starter HumbleFox'86GT
  • Start date Start date Feb 17, 2018

What do you think?

  • More Detail!!

    Votes: 5 100.0%
  • Less Detail!!

    Votes: 0 0.0%

  • Total voters
    5
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 2 of 4 Next Last

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,560
21,729
234
Box behind Walmart
Feb 18, 2018
#21
  • Feb 18, 2018
  • #21
Oh wait, don't alternators and water pumps spin the other way up there?



Never mind, Never mind That's Australia.
 
Reactions: Davedacarpainter and General karthief

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 18, 2018
#22
  • Feb 18, 2018
  • #22
yeah and beer comes out the bottom of bottles instead of the top lol
hang on a sec i gotta step outaa the igloo to feed my polar bear... brb..
 
Reactions: Noobz347

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Feb 18, 2018
#23
  • Feb 18, 2018
  • #23
That spray paint looks great compared to what was there before. No shame in that. Keep it up!
 
Reactions: HumbleFox'86GT

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 18, 2018
#24
  • Feb 18, 2018
  • #24
95BlueStallion said:
That spray paint looks great compared to what was there before. No shame in that. Keep it up!
Click to expand...
Thanks man
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,560
21,729
234
Box behind Walmart
Feb 18, 2018
#25
  • Feb 18, 2018
  • #25
HumbleFox'86GT said:
yeah and beer comes out the bottom of bottles instead of the top lol
hang on a sec i gotta step outaa the igloo to feed my polar bear... brb..
Click to expand...

I always wanted a polar bear.
 

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 18, 2018
#26
  • Feb 18, 2018
  • #26
next i moved onto scuffing up the panels and stripping trims and such the hatch weighed a ton i definitely underestimated that Check out all the nastiness in the hatch valley!! pulled the bumper cover the layers of paint were completely breaking down in spots and literally popped with a putty knife started filling in the stone chips on the hood decided to grab a fender and do a test panel for the new ss urethane i picked up and see what my colour scheme was gonna end up looking like. I think the car was originally jalapeno red and i wanted to pull it back closer to its former glory
My first thought on the dry fit was, where is my magic wand ?!
 
Reactions: Stevenmverrill, A5literMan, mikestang63 and 3 others

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Feb 18, 2018
#27
  • Feb 18, 2018
  • #27
Damn it, youre making me want to do a single stage on the top half of my car. My hood was repainted and doesnt match, so its been on my mind to give it a fresh coat.
 

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 18, 2018
#28
  • Feb 18, 2018
  • #28
95BlueStallion said:
Damn it, youre making me want to do a single stage on the top half of my car. My hood was repainted and doesnt match, so its been on my mind to give it a fresh coat.
Click to expand...
i'm pretty happy with the results, i'm still working on my flow with my gravity feed hvlp gun and such and i don't have a booth yet, I figured that 300$ for a gallon of material would let me shoot the whole car and lay down enough mil to have some cut and buff capability..which i hadn't ever done before either... anyway it laid down nice
i would say go for it! just think how sweet it'll look.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Feb 18, 2018
#29
  • Feb 18, 2018
  • #29
believe it or not, that car looks fairly all there.. nice starti ng point and some decent parts on it
Regarding the engine bay. did you put down some POR15 or at least use some primer and remove the old paint and rust? At a minimum I would use rattle can rust converter and preferealy POR15 all in the inner fender. firewall, door jambs, cowl, radiator support etc, while you have the car blown apart. I'd also address the damaged frame rails....

How do the front and rear torque boxes look?
 
Reactions: A5literMan

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 18, 2018
#30
  • Feb 18, 2018
  • #30
mikestang63 said:
believe it or not, that car looks fairly all there.. nice starting point and some decent parts on it
Regarding the engine bay. did you put down some POR15 or at least use some primer and remove the old paint and rust? At a minimum I would use rattle can rust converter and preferealy POR15 all in the inner fender. firewall, door jambs, cowl, radiator support etc, while you have the car blown apart. I'd also address the damaged frame rails....

How do the front and rear torque boxes look?
Click to expand...

yeah it is a 95% complete project i would say. As far as the engine bay goes, no i didn't do a proper prep on it, knowing it was going to need more major work later i basically just scraped it down roughed it up with 180 everywhere and wiped it down, and then hit it with rustoleum
I figured i would clean it up to start, and make sure it ran good and learn what to look for while focusing on the rest of the body and the interior. My revised plan since then is to eventually pull the motor and do it all up right, mostly due to the soft driver front tq box i just found recently, which i suspect will need the cut out, replace the steel k member sleeves inside and weld up... the rears looked good to me but i'm going to look more carefully at them and maybe reinforce them since i'm learning to weld now in the interim.
 
Reactions: RaggedGT

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 19, 2018
#31
  • Feb 19, 2018
  • #31
Next i started pulling the interior out of the way and into storage found a small hole in the pass footwell and the driver front pan needs replacing aswell but i decided to continue prepping the exterior first Took 180 to the whole shell...
And then pulled the doors... Guess some water had been running down the a pillar for a while and seized up the hinge bolts! sheared the head off 1 had to drill and tap that.
Doors were pretty soft on the bottom seams , damn salt they use up here wrecks everything i swear man Started skimming in a few low spots ... A few pin holes in the hatch valley needed addressing... started grinding down and throwing down a little epoxy in trouble spots thought i'd show the holes before filling... and buzzing down the hood.
 
Reactions: RaggedGT, 02 281 GT and mikestang63

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Feb 19, 2018
#32
  • Feb 19, 2018
  • #32
damn you work fast.....
 
Reactions: A5literMan

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 19, 2018
#33
  • Feb 19, 2018
  • #33
mikestang63 said:
damn you work fast.....
Click to expand...
lol i did actually i wish i took more time and stripped the whole thing down looking at it now... especially seeing some of the quality
build threads going on here, it's hard drawing the line on how far to go but i was desperate to drive it!
 

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 21, 2018
#34
  • Feb 21, 2018
  • #34
After finishing off the filler work i started masking her down for a full epoxy prime coat..... Ignore the dust...
"Plastic will flake everywhere on second pass!!" you say, i know i know...
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,560
21,729
234
Box behind Walmart
Feb 21, 2018
#35
  • Feb 21, 2018
  • #35
Do you plan to take a peek inside the frame rails where the motor mounts attach?

It's often scary in there.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,560
21,729
234
Box behind Walmart
Feb 21, 2018
#36
  • Feb 21, 2018
  • #36
Here's a link that shows what I'm talking about:


https://www.stangnet.com/mustang-fo...nstructions-inside.848816/page-2#post-8539223


Scroll down from there.
 

HumbleFox'86GT

Active Member
Jan 30, 2018
43
73
38
Barrie, Ontario, Canada
Feb 21, 2018
#37
  • Feb 21, 2018
  • #37
Noobz347 said:
Here's a link that shows what I'm talking about:


https://www.stangnet.com/mustang-fo...nstructions-inside.848816/page-2#post-8539223


Scroll down from there.
Click to expand...
Yea I am definitely planning to go there, actually Scotts thread was one of the ones that made me realize!
unfortunately lol when i picked her up i knew nothing of that trouble area, but now i'm startin' to get it,

I think i'm kinda doin' this car in reverse a little bit, which'll mean redoing things i could've done first, but at the expense of driving it while i save up the coin its the right way for me so far,
i plan a long and illustrious journey with this fox, and providing i never have to sell it, it's just my canvas to learn car building and i'm learning a ton!
 
Reactions: 95BlueStallion

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Feb 21, 2018
#38
  • Feb 21, 2018
  • #38
You know what man, not everyone can do the full on expensive rebuild. There is nothing wrong what you are doing. If it makes you happy, then good for you brother. Now if you are bondoing up any rust holes (and Im not trying to imply you are), then just be honest with a future buyer if you decide to sell later.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Feb 21, 2018
#39
  • Feb 21, 2018
  • #39
95BlueStallion said:
You know what man, not everyone can do the full on expensive rebuild. There is nothing wrong what you are doing. If it makes you happy, then good for you brother. Now if you are bondoing up any rust holes (and Im not trying to imply you are), then just be honest with a future buyer if you decide to sell later.
Click to expand...

 
Reactions: A5literMan, BlakeusMaximus, 95BlueStallion and 3 others

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Feb 21, 2018
#40
  • Feb 21, 2018
  • #40
mikestang63 said:
Click to expand...
Bwaahaahaahaa
 
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 2 of 4 Next Last
You must log in or register to reply here.

Similar threads

S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
K
Electrical charging issue
  • knucklehead11
  • Jul 15, 2024
  • SN95 V6 Mustang Tech
Replies
5
Views
1K
SN95 V6 Mustang Tech Jul 16, 2024
Mcmahst
B
Help price this Fox
  • Blueinfan
  • Jul 27, 2023
  • What is it Worth?!?!?
Replies
0
Views
998
What is it Worth?!?!? Jul 27, 2023
Blueinfan
B
5
What's it Worth? 1990 Notchback 5.0
  • 50notch90
  • Apr 14, 2024
  • What is it Worth?!?!?
Replies
4
Views
2K
What is it Worth?!?!? Apr 23, 2024
50notch90
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?