metal vibration @ 2000 rpms 2003 GT

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Nov 29, 2006

#1

• Nov 29, 2006

• #1

No, it's not the exhaust. I just had a whole new system headers xpipe catback and it still makes this tin like vibration. It is only when i am driving, not parked revving the engine. I thought it might be the disc brake shield, but it wasn't loose. Any ideas??

 

steveb24

New Member

Nov 28, 2005

555

0

0

wilmington, DE

Nov 29, 2006

#2

• Nov 29, 2006

• #2

spare tire and jack?

 

B

bakos24

I find there is nothing better than a tasty wiener

Nov 29, 1999

4,461

87

134

NE, OH

Nov 29, 2006

#3

• Nov 29, 2006

• #3

Did it do it before you had the exhaust put on?

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Nov 29, 2006

#4

• Nov 29, 2006

• #4

Yes it did it before i had new exhaust put on. It's coming from the front of the car.

 

RedDaemon

10 Year Member

Mar 31, 2005

3,470

9

108

Atlanta, GA

Nov 29, 2006

#5

• Nov 29, 2006

• #5

i would tell you to check ur spark plugs but idk if this would be something to check this early on in the game

 

J

jon595

New Member

Nov 23, 2006

15

0

0

FL

Nov 29, 2006

#6

• Nov 29, 2006

• #6

You need to isolate the noise. Have someone ride with you with the windows down. See what side it is coming from, and then replace that side wheel bearing (hub).

 

HoustonGT

Gilded Gelding

Apr 6, 2003

1,418

0

0

Houston

Nov 29, 2006

#7

• Nov 29, 2006

• #7

Sound like marbles in a tin can?

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Nov 29, 2006

#8

• Nov 29, 2006

• #8

I guess the best way to describe it is the tinny rattle sound you hear from a loose heat shield on the cats, but it only makes this sound while moving @ 2000 rpms. I know it is on the passenger side.

Would a wheel bearing do this?

 

J

jon595

New Member

Nov 23, 2006

15

0

0

FL

Nov 29, 2006

#9

• Nov 29, 2006

• #9

Yep!

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Nov 30, 2006

#10

• Nov 30, 2006

• #10

jon595, I will try the wheel bearing. I hope your right because i am sick of hearing crazy noises on my stang.

 

DCjuggalo

Member

May 18, 2003

169

0

16

Charlotte, NC

Dec 3, 2006

#11

• Dec 3, 2006

• #11

why would it be a wheel bearing he said its at 2000 rpm's so its something with the driveline or engine

 

the98stang

Active Member

Aug 12, 2005

2,408

0

47

Clovis, CA

Dec 4, 2006

#12

• Dec 4, 2006

• #12

DCjuggalo said:

why would it be a wheel bearing he said its at 2000 rpm's so its something with the driveline or engine

Click to expand...

because rpm's could be consistant with speed as well. Maybe 2k rpms in 5th is 50mph, and the wheel bearing is making the noise.

I would suspect the cats before the wheel bearings though...

 

K

Kilgore Trout

Fried or Broiled ?

10 Year Member

Mar 30, 2005

4,749

95

134

Dec 4, 2006

#13

• Dec 4, 2006

• #13

I had to replace the front wheel hub bearing assemblies on both sides of my GT. It is not hard. Its easily checked, get the car up and see if there is any in and out movement of the wheel. There should be zero. Even the slightest movement indicates failure.

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Dec 4, 2006

#14

• Dec 4, 2006

• #14

The sound was only when driving, not parked. It didn't matter what gear it was in, at 2000 rpms it would always make that sound. I messed with the brake shield by pulling on that hub. The sound did go away before then it didn't make the noise until 2500 rpms. Then it went back to 2000 rpms. I have the parts now for the hub. I hate working outside when its cold. If it gets above 32 degrees i will put it on.

 

D

danny04GT

New Member

Jun 10, 2004

50

0

0

Phoenix

Dec 5, 2006

#15

• Dec 5, 2006

• #15

dimeadz said:

The sound was only when driving, not parked. It didn't matter what gear it was in, at 2000 rpms it would always make that sound. I messed with the brake shield by pulling on that hub. The sound did go away before then it didn't make the noise until 2500 rpms. Then it went back to 2000 rpms. I have the parts now for the hub. I hate working outside when its cold. If it gets above 32 degrees i will put it on.

Click to expand...

I have the exact same issue. Same RPM's too. I tried the bending the dust shields on the brakes last week and the vibration changed to 2800 RPM for a few days. Please post up if you are able to resolve this. That vibration is driving me nuts.

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Dec 5, 2006

#16

• Dec 5, 2006

• #16

I will be changing it tommorrow at a friends house. I will keep you posted.

 

W

w.neurauter

New Member

Apr 25, 2005

98

0

0

Dec 6, 2006

#17

• Dec 6, 2006

• #17

I have the same issue here as well, it sounds like marbles in a tin can right around 2000-2500 rpm. I have a feeling mine is the cats, not 100% on that though. I wish I would have checked the brake dust sheilds when I put the snow tires on last week. The noise is driving me nuts too, keep us posted.

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Dec 6, 2006

#18

• Dec 6, 2006

• #18

Good news is that my hub was bad. Now the bad news..... the noise is still there....wth i need answers
(Maybe i should add wierd noise to modifications!!!)

 

jasonh_86

I

May 20, 2005

1,156

2

48

Arkansas

Dec 6, 2006

#19

• Dec 6, 2006

• #19

I have been fighting with that same type of noise on that same side for about a month now ... Except mine comes on around 3500-4000rpm in every gear (not sure about 5th, haven't gone that fast since). I have no clue what it is, it just started out of the blue one day

If you find out what it is then let me know.

 

D

dimeadz

New Member

Jun 23, 2006

25

0

0

Dec 6, 2006

#20

• Dec 6, 2006

• #20

Im not the only one with this problem. I could use a little help.