• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Metallic Grinding Noise at Startup

  • Thread starter Thread starter 92CalypsoFiveOh
  • Start date Start date Jul 26, 2008
9

92CalypsoFiveOh

New Member
Sep 20, 2007
2
0
0
Southern New Jersey
Jul 26, 2008
#1
  • Jul 26, 2008
  • #1
Hey Guys,

I tried searching for this but couldn't find much and definetely nothing recently so I thought i'd try a new thread. Basically, every time i start the car (92 LX 5.0) it makes this metallic kinda grinding noise for a couple seconds.. and then goes away.. i have replaced the solenoid a couple times and tried 3 new starters.. it doesn't appear to be causing any damage to the car (according to the shop my friend owns that i take it to), but we are kinda dumbfounded as to what else this could be. I remember in like 2005 i thought i saw a couple ppl with the same issue and there was no resolution. Anyone, know anything else to try for this? Like i said it doesn't appear to be doing damange, its just annoying for a car that sounds good to make that sound for a second at start up. Thanks for your help.
 

myslo50

Member
Jun 12, 2006
247
3
18
ohio
Jul 26, 2008
#2
  • Jul 26, 2008
  • #2
maybee an ignition switch hanging up on start up, does your car have the block plate between the block and trans?
 
9

92CalypsoFiveOh

New Member
Sep 20, 2007
2
0
0
Southern New Jersey
Jul 28, 2008
#3
  • Jul 28, 2008
  • #3
myslo50 said:
maybee an ignition switch hanging up on start up, does your car have the block plate between the block and trans?
Click to expand...

I can have the possible ignition switch checked.. and i'm not sure if my car has teh block plate between block and trans.. i will check with my mechanic. What is the difference that it makes if it does or doesn't have this block?
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jul 28, 2008
#4
  • Jul 28, 2008
  • #4
What kind of shape is your ring gear in? Worn teeth will cause it to slip...especially on cold start up. Check to see if it's loose as well. I had this same issue once and it turned out to be a loose ring gear. I didn't clue in until it was beyond saving and had to install a new one.
 
You must log in or register to reply here.

Similar threads

S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
690
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
192
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
448
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Y
2004 Mustang GT AUTO (4R70W) Grinding noise when going in R or Drive does it as I put it into park too
  • yellowandblack
  • Dec 12, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
309
1996 - 2004 SN95 Mustang -General/Talk- Dec 21, 2024
89ripper
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
2K
Other Auto Tech Jun 13, 2026
427nostang
4
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?