MM Bilstein coilover clearance issues!

[88-378]

I have an AJE K Member and lca's. The springs on the MM coilover are hitting the brake bracket and the line.

Anyone have pics on where you re-located the lines?

I gotta tell ya, mad props for all of you who have done a rebuild before. This is not fun! everything becomes a hassle!

 

[Blandnuts]

I can get you a pic tomorrow, but that's with cobra brakes/stock arms/stock Kmember. I remember bending slightly and moving the bracket over towards the rear of the car (there should be another hole to screw the bracket in).

 

[Shaolin Crane]

Odd i never had an issue with the bracket hitting, but i did have the cable rub, i re pitched the banjo fitting away from the spring and tires to keep everything happy

 

[Blandnuts]

What side is it?

 

[88-378]

I had to do both sides. Moved them to the rear and re-bent the lines. they were new lines anyway.