MSD 6AL or Digital-6?

[1991vert]

been looking at these 2 and i'm not sure if the digital-6 would be over kill or not

motor:

363
AFR185's
jay allen billet cam
tfs box-r
90mm accufab
novi2000
F.A.S.T. XFI

expecting 650-700RWHP

one of the last things i have to buy. i'm also running an MSD crank trigger setup

let me know your thoughts!

 

[*TURBO GT*]

I would run the digital -6 one if it was me the 7 would be overkill

 

[1991vert]

just wondering if i would need all the extra features of the digital-6? or is it just a more efficient/reliable box over the 6AL?

 

[MikeROD16]

eh, dont waste extra money if you dont really need the features. not sure about the digital 6 but the 6AL has a rev limiter. pretty badass one too. Installed it last week on my friends coupe just to try it out. tried out the 3k chip and works like a dream. Thats just my feedback about the 6Al, i have no clue about the dig. 6


Here's the vid. dont mind my laugh, i got exited...
View attachment 316350

 

[1991vert]

a little TOO excited it sounds like

 

[MikeROD16]

yeah lol, my first time putting an msd and got it first try with no errors. that NEVER happens.

 

[S&B]

i use the 6AL and a FAST, it works fine. the FAst will run the car just make sure you have reliable pieces that you can count on reproting to it. You want to buy a YSI setuP

 

[1991vert]

i use the 6AL and a FAST, it works fine. the FAst will run the car just make sure you have reliable pieces that you can count on reproting to it. You want to buy a YSI setuP

negatory on the YSi. what kind of clutch are you running?

 

[*TURBO GT*]

i use the 6AL and a FAST, it works fine. the FAst will run the car just make sure you have reliable pieces that you can count on reproting to it. You want to buy a YSI setuP

pm me on the dollar figure and material listage