Mustang clutch pedal?

[Mopar1]

I have dealt only with linkage type clutch pedal assemblies on manual tranny vehicles.

I am going to be doing a AOD to T-5 swap in the near future. Right now Im looking at the UPR clutch quadratant and how it fits on the pedal assembly. Now this may be a silly question, but I see no return spring for the clutch pedal itslef. Is there a return spring somewhere? What returns the clutch pedal to the up position when it is depressed? Is there a return spring attached to the fork going in the bellhousing?

IM AT A LOSS HERE.

 

[dragnazz5.0]

the clutch itself will return the pedal to the correct position

 

[HISSIN50]

Yep, unlike old school stuff with the return spring, the diaphram fingers are the 'return spring'.

That said, you can certainly add a spring if you want (I did it on a mid engined car with a hydraulic clutch - mostly for pedal feel).

Good luck with the swap.

 

[Mopar1]

Cool, thanks guys.