Mustang5L5’s progress thread - Rear window fun

Welp, $100 on marketplace and no bites. Oh well

Haven’t messed with the fox in months. Lots of work travel this summer. Currently 15min down the road from Maximum Motorsports

Going to see if I can take a ride by

IMG_4489.webp
 
  • Like
Reactions: 85GT4V and gkomo
Are you at Hearst Castle up by San Simeon? Benn a few years since I have been there but for some reason that patio seemed familiar.

Yup. That was Hearst.

This place has some amazing views. Touristy stuff done, now I have to go to the office

Saw tons of clean, older cars. But amazingly only one Foxbody so far
IMG_4617.webp
IMG_4537.webp
 
  • Like
Reactions: gkomo and AeroCoupe
When I moved to Phoenix from back east decades ago, I couldn't believe all of the clean, older vehicles I was seeing. It wasn't long before I started buying classics.


I’m seeing cars I haven’t seen in years. Lots of older F150s, and tons of cool 80s era vans and trucks and other stuff.



Final night and I get to go home. My rental is some lame corolla the last 2 weeks and I just hate it.


IMG_4663.webp
 
Last edited:
  • Like
Reactions: fasterthangas
I’ve been in Albuquerque pretty much my whole life and older cars are everywhere. I understand when you guys from back east and north of the rust belt get excited when you see them.
 
Glass out. That was easy. Put it in the sun and the tool cut through it like butter. All of 5-10 mins to do.

Unfortunately now that I can work on the glass, I’m getting inconsistent readings on the defrost grid. Not sure it works well enough to my liking. Gonna borrow an infrared camera and put 12v to it and see what happens. But I think all the conductive paint bled out a bit too much and the grid has too many breaks

But this project might be over. Gonna clean it up and toss back on marketplace. What’s used hatch glass go for? I did all the hard work removing it. I know the hatch trim has value.

IMG_2714.webp
I had a guy complaining to me that I should have a rear defroster, that it's not factory glass, I bought thr car new and that's how it came, so I got to wondering if it's a factory mistake
 

Attachments

  • Screenshot_20260830_211237_Gallery.webp
    Screenshot_20260830_211237_Gallery.webp
    166.2 KB · Views: 10
That does look pretty slick! I wouldn't change a thing.

I can't say for sure, but back then a lot of bits and pieces were optional. Dealers just ordered certain items as standard fare, making the trimmer build lists more rare in terms of production numbers. Sometimes things got promoted to standard equipment for the next MY when the take rate gets overwhelmingly high.

I was working in calibration development on a car model which had just gone into it's 4th year of production when we got an emergency call from plant management. Long story short; someone ordered one without A/C for the first time in the model's run. We had to release an emergency software/cal to cover the no-A/C combo since the A/C control and diagnostics were active in all of the cal variants we had delivered. We checked back to the original BoM and found that opting out of A/C was in the plan, but it took more than 3 years before someone decided to go that route. I'm guessing that it was 1/1, maybe destined to be a track car, since the model got dropped shortly after due to the late-2000s downturn.