• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Paint and Body My car is finally home

  • Thread starter Thread starter Deleted member 215073
  • Start date Start date Feb 24, 2020
Prev
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
  • …
  • 11
Next
First Prev 6 of 11 Next Last

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Apr 23, 2020
#101
  • Apr 23, 2020
  • #101
I ended up stripping all the factory paint off as well. Don't mind the mess, I don't work at that shop anymore. Couldn't get those guys to keep any thing clean!

 
Last edited: Apr 23, 2020
Reactions: Shakerhood
D

Deleted member 215073

Apr 23, 2020
#102
  • Apr 23, 2020
  • #102
The back glass needs to come out due to the amount of heat that the window seals were exposed to. It got hot enough to melt the polyurethane adhesive and crack the windshield all the way around it.

Hagerty is aware of the shop possibly cutting corners. They're also aware that it was painted without prior approval so the shop may have painted the car basically for free.
 
Reactions: Shakerhood and Boostedpimp

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Apr 23, 2020
#103
  • Apr 23, 2020
  • #103
Gravydog said:
I agree with everything Blakeus said, if the car wasn't detrimed before paint what else did they cut corners on. Also, they are working from an insurance estimate, if removing those items is on the estimate and they didn't do them, that's technically insurance fraud, if you need leverage to get things done right.
Click to expand...
Exactly. If its not on the estimate they need to supplement the ins co for anything not on the sheet. The ins co will pay them for it.
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Apr 23, 2020
#104
  • Apr 23, 2020
  • #104
JMGlasgow said:
The back glass needs to come out due to the amount of heat that the window seals were exposed to. It got hot enough to melt the polyurethane adhesive and crack the windshield all the way around it.

Hagerty is aware of the shop possibly cutting corners. They're also aware that it was painted without prior approval so the shop may have painted the car basically for free.
Click to expand...
Maybe twice.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,485
8,709
234
S.I.NY
Apr 23, 2020
#105
  • Apr 23, 2020
  • #105
JMGlasgow said:
The back glass needs to come out due to the amount of heat that the window seals were exposed to. It got hot enough to melt the polyurethane adhesive and crack the windshield all the way around it.

Hagerty is aware of the shop possibly cutting corners. They're also aware that it was painted without prior approval so the shop may have painted the car basically for free.
Click to expand...
The windows not being out of the quarters are a sure way to have it chip later . Along with all the door locks .

Replacement light quality is about the same from any company these days . Basically the same person re pops them all.
 
D

Deleted member 215073

Apr 23, 2020
#106
  • Apr 23, 2020
  • #106
So are they any good? Can my original headlights be resealed?
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,485
8,709
234
S.I.NY
Apr 23, 2020
#107
  • Apr 23, 2020
  • #107
JMGlasgow said:
So are they any good? Can my original headlights be resealed?
Click to expand...
If you have oem ford lights it’s worth trying to reseal them . Otherwise any aftermarket set I have gotten i put I thin bead of silicone on the seams before they go in
 
Reactions: HotFox and General karthief

Potomus Pete

I'm still waiting for the fully nude shots
5 Year Member
Mar 7, 2019
3,308
1,223
153
62
Sarasota Florida
Apr 23, 2020
#108
  • Apr 23, 2020
  • #108
Smart to get the triple lights. Wish I did thats one of the first things I did. One piece is what I have . I got them before I joined any forum not knowing any better.
 

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Apr 26, 2020
#109
  • Apr 26, 2020
  • #109
What’s the latest on this @JMGlasgow?
 
D

Deleted member 215073

Apr 26, 2020
#110
  • Apr 26, 2020
  • #110
Dropped off the new OEM door handles yesterday. Talked to the owners uncle, he was the only person there, and the owner is supposed to call me back Monday. Hopefully we can get on the same page.
 
Reactions: General karthief
D

Deleted member 215073

Apr 29, 2020
#111
  • Apr 29, 2020
  • #111
Quick update.

I talked to the shop manager yesterday over the phone. He was a bit distraught that my car has fell through the cracks the way it has. He assured me the car will be fixed right, and that the original look of the car will be maintained.

My theory was correct pertaining to them not even going over the estimate, and no communication from the front to the back of the shop concerning the task at hand.

The individual that took my car in no longer works there, and it sounds like he screwed up a lot and left a giant mess to clean up. For some reason he told the shop that my car was a rush job. Those words were never uttered by me. From the beginning I told them to take their time and fix it right.

I would like to be able to drive it sometime this summer or fall since I barely drove it last year with all the terrible weather we had. But having a car that was fixed correctly is more important.


As far as the house, asbestos removal is underway. They are hoping to be done by the middle of next week. Then the real repair work can begin. I sure am tired of living under other roofs beside my own though.
 
Reactions: Shakerhood, Steel1 and Olivethefet

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,956
2,937
153
Long Island, NY
Apr 29, 2020
#112
  • Apr 29, 2020
  • #112
Been following along..... glad they’re getting it straightened out for you!!
One would be enough to worry about, but to have the house and the car adding stress is too much. If people could just do the right thing the first time!!
Hope they both come together soon!!
 
Reactions: Deleted member 215073

Gravydog

dripping from every hole
Oct 6, 2019
157
356
73
49
Canton Ohio
Apr 30, 2020
#113
  • Apr 30, 2020
  • #113
Hopefully they follow through, don't sign the insurance check until you are satisfied.
 
D

Deleted member 215073

Apr 30, 2020
#114
  • Apr 30, 2020
  • #114
That will be difficult because Hagerty issued me the check, not the shop, and I already cashed it.
 
Reactions: Gs1987GT and General karthief

BlakeusMaximus

Still got to try a little lube on my speedo head
5 Year Member
Jul 12, 2017
2,474
1,348
173
Apr 30, 2020
#115
  • Apr 30, 2020
  • #115
You have to pay the shop that initial amount and the deductible. Any supplemental checks usually go directly to the shop. Id be surprised if they didn't have a supplement. Do you know if they asked Hagerty for any additional items? Additional parts and labor??
 

Gravydog

dripping from every hole
Oct 6, 2019
157
356
73
49
Canton Ohio
Apr 30, 2020
#116
  • Apr 30, 2020
  • #116
JMGlasgow said:
That will be difficult because Hagerty issued me the check, not the shop, and I already cashed it.
Click to expand...
Oh, your fine then, that means they aren't getting paid until your happy. Like Blakeus said, if they have a supplement Haggerty will usually pay the shop directly.
I know it's a pain, but at least you have some leverage to get the car done correctly.
 
Reactions: Gs1987GT
D

Deleted member 215073

Apr 30, 2020
#117
  • Apr 30, 2020
  • #117
I did pay them the initial amount (almost $6500). There is a $0 deductible on the policy.

The manager has assured me that it will be done and that it isn't done until I'm satisfied. They are also obligated to bring the car back to pre loss condition per Hagerty, and the insurance will step in if they have to.
 
Reactions: General karthief

Rdub6

So while I wait to figure out my rear end issues
5 Year Member
Dec 29, 2017
3,956
2,937
153
Long Island, NY
Apr 30, 2020
#118
  • Apr 30, 2020
  • #118
Since the one employee is no longer working there (I assume he was let go?) and the manager seems to want things to be right, I’d say you’re probably in good shape now! Fingers crossed!
 
D

Deleted member 215073

Apr 30, 2020
#119
  • Apr 30, 2020
  • #119
From what I gathered, "let go" would be a nice way of putting it.
 
D

Deleted member 215073

May 9, 2020
#120
  • May 9, 2020
  • #120
Nothing new on the car, but the asbestos removal is complete. I'll let the pictures do the talking...



This was the kitchen

Living room


Master bedroom

I have other pictures but you get the idea.
 
Reactions: General karthief, Olivethefet and RaggedGT
Prev
  • 1
  • …
  • 4
  • 5
  • 6
  • 7
  • 8
  • …
  • 11
Next
First Prev 6 of 11 Next Last
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
V
A 20 year old car, with many faults!
  • Virus101
  • May 4, 2020
  • SN95 4.6L Mustang Tech
Replies
7
Views
2K
SN95 4.6L Mustang Tech May 9, 2020
Cobra262
C
S
Electrical 96 GT Electrical mystery
  • Sonare
  • Jun 28, 2019
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Jul 14, 2019
wmburns
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?