My first post is a DOOOOOOOZIE!!!!!!!

Stalkerfiveo · Dec 27, 2004

this is a chart for TPS units on stangs. If I have a 95 and Im doing the fox conversion, which Fox TPS do i buy??? The CX1323 or the CX1133. There are aparently two different TPS units for the Fox and SN95 cars. I know Ford could tell me which one i need for my 95 but HOW IN THE HELL do I figure out which to get for a Fox setup on a 95???

Ive called Mustangs Unlimited and ithey are model specific and it DOES MATTER which one you buy. Never have I seen anyone mention this problem.WTF???

PLEASE HELP! Im panicking as you may be able to tell

wytstang · Dec 27, 2004

I think the 1st on is the one you need I would assume the 2nd option is for a cobra.

Stalkerfiveo · Dec 27, 2004

wytstang said:
I think the 1st on is the one you need I would assume the 2nd option is for a cobra.

oooh, good thought there. i have a tendency to overthink things and not see the obvious sometimes. ill be oredering from 5.0resto. their tech is usually pretty good, ill ask them to double check.

BTW-if it IS for the cobra why would there be 2 TPS's for 89-93 and not just 93

wytstang · Dec 27, 2004

You got me there I have no clue. I checked the 94/95 FAQ section up top it has the fox swap (good refrence to go by if you need help) it just says you need a fox tps hopefully some on like gtjake or rio who have done the swap already will chim in.

wytstang · Dec 27, 2004

Oh and welcome to the board you made on mistake already here a hint

blksn955.o · Dec 27, 2004

would it be easier to buy the FMS fox t-body as they come with new sensors? I mean you would know it is the right one for that t-body then.

I think as long as you would have the correct wires run there would be no issue, That may be the reason they are not interchangable due to diff. wireing? Since you will be splicing wires anyway

Stalkerfiveo · Dec 27, 2004

wytstang said:
Oh and welcome to the board you made on mistake already here a hint

yeah, the "How To" here was shown to me by someone on Corral. Its a great article and thats what Im using to finish the swap.

ill make a thread with pics starting now................

Stalkerfiveo · Dec 27, 2004

blksn955.o said:
would it be easier to buy the FMS fox t-body as they come with new sensors? I mean you would know it is the right one for that t-body then.

I think as long as you would have the correct wires run there would be no issue, That may be the reason they are not interchangable due to diff. wireing? Since you will be splicing wires anyway

i have a 94/95 FMS 65mm now. i need a 75mm for my setup

My first post is a DOOOOOOOZIE!!!!!!!

Stalkerfiveo

New Member

wytstang

Mustang Master

Stalkerfiveo

New Member

wytstang

Mustang Master

wytstang

Mustang Master

Attachments

blksn955.o

Stalkerfiveo

New Member

Attachments

Stalkerfiveo

New Member

Similar threads

My first post is a DOOOOOOOZIE!!!!!!!

New Member

Mustang Master

New Member

Mustang Master

Mustang Master

Attachments

New Member

Attachments

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency