• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

My Fox(es) In Surgery - Looking Like A Car Again,sort Of

  • Thread starter Thread starter mikestang63
  • Start date Start date Dec 10, 2017
  • 1
  • 2
  • 3
  • …
  • 6
Next
1 of 6 Next Last

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 10, 2017
#1
  • Dec 10, 2017
  • #1
Don't think I told you guys about this.
About a month ago I woke up early to go to a car show. For the first time in 5 years I forgot to put the hood pins on and,,,,,,,,,,,,,,,, hood came up. Crushed the cowl and did some danmage to the hood.

As I totally suck on body work, took the car to a budd's shop for them to repair the cowl, hood, and repaint. So........ when they removed the fenders that is when the fun started. Seems the prior owner did some half assed windshield repacement and it has been leaking for years, causing a lot of rust. They also decided bondo was the preferred method of repairing rust and cracks.. Needless to say I was more than a little shocked as this was a one owner low mile car and showed zero signs of this kind of rot...

So anyway, the rust and rot is being fixed, thebody parts primed, painted, parts undercoated. and the car will look like new again. A lot of stress and haggling Grundy athey are being great about this.

Luckily i found a used cowl in a junkyard car .

Guess it is actually a good thing this happened and the rust being taken care of before got to the point of totalling the car.

Enjoy the carnage pictures.

 
Reactions: Fordfreak93, A5literMan and RaggedGT

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 10, 2017
#2
  • Dec 10, 2017
  • #2
the horror,,,, the horror

 

Jersey Joe

I remember blowing that Monkey's ass
10 Year Member
Nov 29, 1999
762
1,292
154
Bloomingdale N.j.
Dec 10, 2017
#3
  • Dec 10, 2017
  • #3
Friggin eh, you just never know what's lurking down under no matter how nice the outside is.
 
Reactions: mikestang63

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Dec 10, 2017
#4
  • Dec 10, 2017
  • #4
That rust is a shame. Good thing you found it now before it got worse.

I'm seeing rust issues more and more in the A pillar area of our cars. We used to just have to check strut towers and floors....now these cars are at the age where we have to keep our eyes open for this stuff too.
 
Reactions: mikestang63

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Dec 10, 2017
#5
  • Dec 10, 2017
  • #5
I’m glad to see they’re getting after it. Did you find a salvage hinge/windshield pillar too?

Does the rot extend into the upper firewall as well?
 
Reactions: mikestang63

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,441
1,526
194
Maryland
Dec 10, 2017
#6
  • Dec 10, 2017
  • #6
That’s a beautiful car. Hard to believe it looked bad in there. But, if it was dry, you probably never would have known anyway.
 
Reactions: mikestang63

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Dec 11, 2017
#7
  • Dec 11, 2017
  • #7


Very surprised by that rust. Wow! Good luck on the fixes Mike. Glad you found it now rather than later.
 
Last edited: Dec 11, 2017
Reactions: mikestang63

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Dec 11, 2017
#8
  • Dec 11, 2017
  • #8
Have them check behind the area where the door hinges are... Been seeing allot of nice cars crusty behind that area
 
Reactions: mikestang63

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,945
224
Massachusetts
Dec 11, 2017
#9
  • Dec 11, 2017
  • #9
Wow.

I'm going to have to check my car out more closely now when I pull the bumper/fenders off to do my motor work
 
Reactions: mikestang63

Reddevil91

15 Year Member
Mar 3, 2010
1,630
773
163
Dec 11, 2017
#10
  • Dec 11, 2017
  • #10
For your hood supports did you have to readjust your hood, thinking about getting some just heard it moves your hood so it’s not flush. Where did you get that cluster in your vents? Was that custom made or a prefab ordered somewhere? What kind of HPs you pushing?
 

Fordfreak93

Mustang Master
Mar 12, 2009
264
273
84
Mooresville, NC
Dec 11, 2017
#11
  • Dec 11, 2017
  • #11
Damn, glad you are finding it before it got too bad. My car was originally from FL and that area was bad on my car too. The original owner let it sit next to a well water sprinkler in their apartment complex every morning and it rotted out behind the door hinge too. Looks like they are doing a great job, what a difficult repair!
 
Reactions: mikestang63

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Dec 11, 2017
#12
  • Dec 11, 2017
  • #12
All I can think about when I see the pictures of that guy working on your car is how clean your car "was" before the hood flew up. Now your car is sitting out in the rain with no hood and all those polished/chrome parts are getting weathered and lots of debris flying in to every nook and cranny of your engine. Put a friggin blanket over the engine while working on that beautiful car!!! They're not working on a Ford Contour for crying out loud!
 
Reactions: stangboy, stpete, BigK22 and 3 others

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 11, 2017
#13
  • Dec 11, 2017
  • #13
Reddevil91 said:
For your hood supports did you have to readjust your hood, thinking about getting some just heard it moves your hood so it’s not flush. Where did you get that cluster in your vents? Was that custom made or a prefab ordered somewhere? What kind of HPs you pushing?
Click to expand...

no readjusting needed
not sure what you mean about cluster for vents? If you mean the cowl gauge holder.:LMR sells it
I'm around 450 rwhp
 
Reactions: RaggedGT

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 19, 2017
#14
  • Dec 19, 2017
  • #14
sooooo... Merry Frikking Christmas to me

my buddy at the body shop is making good progress on the driver side..cut out all the rust, fabbed up new sheet metal, mocked up the replacement cowl

So far so good right?




. but....................... went over to the passenger side that had some bondo on it covering the inner frame for the fender and...........................

picture of how the prior owner "repaired" the passenger side
notice the bondo and the part cut into two pieces




let's pop off the one piece they BONDOED ON shall we? GREAT MORE FRIKKIN RUST




doesnt EVERYONE BONDO THE DAMN window pillar on?



with all of the BONDO and patch pieces removed...HOLY CRAP



So it is off to the junkyard to cut out a window pillar and the sheet metal and patch it in. I swear I want to go find the prior owner and kick him in the nuts.

I keep telling myself that its a good thing the hood flew up in hindsight or this car would have been completely rusted out.
Did I mention how much this sucks?
 
Reactions: stangboy, elarm1, RangerJoe and 1 other person

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Dec 19, 2017
#15
  • Dec 19, 2017
  • #15
Ah JEEZ Mike, that sucks so bad!

I'm sorry brother, damn.

Good luck on the parts search. If it gets desperate, let me know. I could probably find something for you. Just got to overcome the 1800 mile barrier will be all.
 
Reactions: General karthief and mikestang63

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,945
224
Massachusetts
Dec 19, 2017
#16
  • Dec 19, 2017
  • #16
Whatbin the holy hell? What was actually holding that windshield up? The glass?
 
Reactions: A5literMan

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,126
3,091
214
Cedar Rapids, Iowa
Dec 19, 2017
#17
  • Dec 19, 2017
  • #17
mikestang63 said:
sooooo... Merry Frikking Christmas to me

my buddy at the body shop is making good progress on the driver side..cut out all the rust, fabbed up new sheet metal, mocked up the replacement cowl

So far so good right?




. but....................... went over to the passenger side that had some bondo on it covering the inner frame for the fender and...........................

picture of how the prior owner "repaired" the passenger side
notice the bondo and the part cut into two pieces




let's pop off the one piece they BONDOED ON shall we? GREAT MORE FRIKKIN RUST




doesnt EVERYONE BONDO THE DAMN window pillar on?



with all of the BONDO and patch pieces removed...HOLY CRAP



So it is off to the junkyard to cut out a window pillar and the sheet metal and patch it in. I swear I want to go find the prior owner and kick him in the nuts.

I keep telling myself that its a good thing the hood flew up in hindsight or this car would have been completely rusted out.
Did I mention how much this sucks?
Click to expand...

Holy crap man, that is crazy!
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
Dec 19, 2017
#18
  • Dec 19, 2017
  • #18
I has sads after seeing that, glad you are fixing it up.
 
Reactions: mikestang63

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Dec 19, 2017
#19
  • Dec 19, 2017
  • #19
Just to think.....I junked my favorite car ever for less rust than that.

Makes me feel a little bad for letting her go. I actually watched the crusher smash her...surprising how well the roll cage held up at first.

Glad your in it to win it.

That rust looks scary.....but imagine if you hadn't found it. That car was a rolling death trap. At least, its in an area that won't really be seen.
 
Reactions: mikestang63

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Dec 19, 2017
#20
  • Dec 19, 2017
  • #20
My stomach hurts just reading this post. Hope that’s the end of the surprises
 
Reactions: mikestang63
  • 1
  • 2
  • 3
  • …
  • 6
Next
1 of 6 Next Last
You must log in or register to reply here.

Similar threads

M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
766
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
396
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?