My next mod: LCA's (what to get?!?!?!)

[rygenstormlocke]

Well, I'm researching for my next mod, and wanted to get some opinions before I pull the trigger. Also wanted to get some opinions on UCA's as well, and if they are really needed.

So far, I like what I hear on the BMR's, here is what I'm looking to get:

http://www.bmrfabrication.com/2005Mustang.htm
TCA019 Tubular Lower Control Arms w/poly bushings $119.95 pr.

Heres a pic of them:

I have never had LCA's put on my car, so I welcome everyone's input on them. Thanks everyone!

 

[bigcat]

i have heard nothing but positve remarks about the BMR products. when it is time for suspension mods for me, i will be buying BMR. if you have wheel hop, then LCAs are for you. if you dont have wheel hop, then LCAs might not be as necessary for you.

 

[nhra427]

If I was doing it I would go with the adjustables so you can adjust pinion angles. Thats what we did with the 3rd gen camaro drag car

 

[bigcat]

my understanding is that the pinion angle is adjusted with the upper control arm on the stangs. the lower control arms locate the instant center for your launches. if you buy the LCA relocation brackets also, you can change the instant center of your car to improve your launch and 60' times. the camaros had two LCAs and two UCAs, right? the triangulated 4 link type is a little different than the 3 link with panhard bar.