• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

N/A Stroker Help!

  • Thread starter Thread starter 88-378
  • Start date Start date Apr 15, 2008

88-378

Member
Aug 10, 2007
14
2
16
Alpharetta, GA
Apr 15, 2008
#1
  • Apr 15, 2008
  • #1
I want a bullit proof, reliable 350+ to the wheels in a stroker.

Please post your combo or let me know how to get there. It will be EFI.

I will go custom cam and use AFR heads. i have an MSD, 30lb injectors a 75MM Prom Mass Air and a 70MM TB along with a hogged out Cobra upper and lower.

these will get me there.. what else do I need? Would like power from 1,500 to 6,000!
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Apr 15, 2008
#2
  • Apr 15, 2008
  • #2
you aren't going to get 350+ to the wheels with a basic stroker using those parts.

I think you are going to need at least 10.5:1 compression and might as well go with a 347. Are you constrained to using a 302 based motor...what about a 351 based stroker??? 408w???

If you have to stick with the 347 combo you are going to need some AFR 185's, custom cam and something a little bigger than a ported cobra intake. probably something like a ported systemax or ported RPM II or TFS-R. The throttle body will do but a 75mm would be slightly better. You might want to think about a bigger MAF, maybe a 90mm Pmass or Lightning MAF. This motor is really going to need to breath to make 350+ rwhp. Full exhaust is a must.
 

88-378

Member
Aug 10, 2007
14
2
16
Alpharetta, GA
Apr 15, 2008
#3
  • Apr 15, 2008
  • #3
ninety15.0 said:
you aren't going to get 350+ to the wheels with a basic stroker using those parts.

I think you are going to need at least 10.5:1 compression and might as well go with a 347. Are you constrained to using a 302 based motor...what about a 351 based stroker??? 408w???

If you have to stick with the 347 combo you are going to need some AFR 185's, custom cam and something a little bigger than a ported cobra intake. probably something like a ported systemax or ported RPM II or TFS-R. The throttle body will do but a 75mm would be slightly better. You might want to think about a bigger MAF, maybe a 90mm Pmass or Lightning MAF. This motor is really going to need to breath to make 350+ rwhp. Full exhaust is a must.
Click to expand...

I don't agree. I have a buddy with a 347 using what I have as far as injectors, mass air and tb and he does 368 to the wheels. I want to here REAL deals. Not what you think but what you know!
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Apr 15, 2008
#4
  • Apr 15, 2008
  • #4
Killercanary is makeing 356 rwhp with AFR 165, and his custom 302 camshaft (retarded), 65mm TB.

This is all with a 331.
 
3

347HO

Member
Jan 13, 2008
462
2
16
Seattle
Apr 15, 2008
#5
  • Apr 15, 2008
  • #5
356 out the back with a 65mm TB and 165 AFRs... that's impressive IMO.
You wouldn't happen to have the run sheet or trap speed on that setup would you?
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Apr 16, 2008
#6
  • Apr 16, 2008
  • #6
He is a member on this site. Paul goes by killercanary.

I believe he ran 115.XX mph, and at the good track he goes to, he says he runs 2 mph faster. So that is 117.XX mph.

This is all with 8.89:1 compression, if I recall and a race weight of 36XX lbs.

Rick @ RNH did a good job with that engine. If Ed would set him up with a 331 camshaft, instead of his old FTI 302 camshaft, that would be a little screamer for a 331.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Apr 16, 2008
#7
  • Apr 16, 2008
  • #7
347HO said:
356 out the back with a 65mm TB and 165 AFRs... that's impressive IMO.
You wouldn't happen to have the run sheet or trap speed on that setup would you?
Click to expand...

I would since I built it..lol

One more tid bit on that motor is, it is set-up for boost with a dish piston and around 9:5:1 compression. The motor is a basic forged stroker, upgraded valve train in the 165's, custom hyd cam made for his old 302 set-up (small by comparassion to what I use for strokers)

I will be honest I'd rather have something other then a ported Cobra on a stroker, with a 185cc+ head.
 

BlooDReigN

Member
Feb 22, 2004
283
1
16
Calgary, Alberta
Apr 16, 2008
#8
  • Apr 16, 2008
  • #8
My 408 is making 417whp @ 5300 and 437wtq @4700.

AFR 205 heads, custom cam, TFS box R intake, 42 lb/hr injectors and 10.9:1 compression.

Still hoping to get a bit more power out of it this year with some "tweaks" before I put the nitrous on.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Apr 16, 2008
#9
  • Apr 16, 2008
  • #9
Rick 91GT said:
One more tid bit on that motor is, it is set-up for boost with a dish piston and around 9:5:1 compression.
Click to expand...

Paul said it has 8.89:1 compression (just checked), which is even more impressive. It is one heck of a dish piston to.
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
Apr 16, 2008
#10
  • Apr 16, 2008
  • #10
Rick built my motor also, and our goal was 350rwhp NA at 9:1 compression because i want to add boost later on. We always hope for more, but it seems pretty common for 8.2 deck strokers to make that number with proven parts. Im hoping to have my Dart motor running in a few weeks. Now the car will be tuned on a Mustang Dyno so we will have to see. 350 on a Mustang Dyno would be frickin outstanding!
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Apr 16, 2008
#11
  • Apr 16, 2008
  • #11
350hp is super easy with a 331 or 347.

Rick built my 347 3 years ago and I am very happy with the work! Not that i'd every dyno it, but it should make near 400rwhp.

I'm interested in seeing what you make, Just4bob. Our combo's look similar on paper but they're very different.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Apr 16, 2008
#12
  • Apr 16, 2008
  • #12
5spd GT said:
Paul said it has 8.89:1 compression (just checked), which is even more impressive. It is one heck of a dish piston to.
Click to expand...

Your right, 9.5:1 is what I tried to push him too.. I just looked back in my build log.
 

88-378

Member
Aug 10, 2007
14
2
16
Alpharetta, GA
Apr 16, 2008
#13
  • Apr 16, 2008
  • #13
Rick 91GT said:
I would since I built it..lol

One more tid bit on that motor is, it is set-up for boost with a dish piston and around 9:5:1 compression. The motor is a basic forged stroker, upgraded valve train in the 165's, custom hyd cam made for his old 302 set-up (small by comparassion to what I use for strokers)

I will be honest I'd rather have something other then a ported Cobra on a stroker, with a 185cc+ head.
Click to expand...

I was looking to you for my engine, but i never heard back from you? Send me a PM with some quotes..

Tmoss will be porting the Cobra intake.
 

93RedGT

New Member
Apr 6, 2005
11
0
2
indy
Apr 16, 2008
#14
  • Apr 16, 2008
  • #14
i have a 331 gt-40 irons ported with 2.02 /1.54s, BBK SSI, custom cam, 76mm c&l mass,70mm tb,shortys, 3" headerback and on 10:1 com, and custom tune. It made 313HP and 382lbft
 

88-378

Member
Aug 10, 2007
14
2
16
Alpharetta, GA
Apr 16, 2008
#15
  • Apr 16, 2008
  • #15
93RedGT said:
i have a 331 gt-40 irons ported with 2.02 /1.54s, BBK SSI, custom cam, 76mm c&l mass,70mm tb,shortys, 3" headerback and on 10:1 com, and custom tune. It made 313HP and 382lbft
Click to expand...

No offense, but that doesn't sound right! There has to be more than 313!
 

Shamus O'toole

New Member
Jul 3, 2007
18
0
0
Florida
Apr 16, 2008
#16
  • Apr 16, 2008
  • #16
327cid AFR185's, Ed Curtis cam.....buncha other crap..(SEE southeast classifieds) 408rwhp w/efi 423 w/carb.
 

SQUEEZE&STROKE

New Member
Jun 24, 2005
0
0
0
SOUTHERN CA
Apr 16, 2008
#17
  • Apr 16, 2008
  • #17
331 with Victor Jr Heads, Victor Jr manifold (both untouched) Trickflow stage 3 cam and BBk Shorties...750 HP Carb (I know you want EFI but I only have carb #'s)-407 RWHP
 

93RedGT

New Member
Apr 6, 2005
11
0
2
indy
Apr 17, 2008
#18
  • Apr 17, 2008
  • #18
88-378 said:
No offense, but that doesn't sound right! There has to be more than 313!
Click to expand...
the heads are really holding it back. and i think i need to change my cam.
 
You must log in or register to reply here.

Similar threads

M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
842
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
C
Fuel pressure help
  • clayton seiders
  • Aug 31, 2024
  • 1994 - 1995 Specific Tech
Replies
12
Views
1K
1994 - 1995 Specific Tech Sep 1, 2024
clayton seiders
C
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
G
Engine At the end of my sanity. 92 GT on jack stands for the last 11 years - NO START
  • Green 94 5.0
  • Apr 13, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
4K
Fox 5.0 Mustang Tech Apr 24, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?