Need a cam

[sheff2720]

ok guys i've got performer heads (1.9/1.6) and a typhoon intake.. i need to figure out what cam i should get with this setup.. i dont have the money to get one from ed curtis, or i would.. so im open to all cams other than custom.. im looking to get the most i can out of this setup while staying somewhat streetable.. and im not to worried about emmissions, so that isn't a problem.. anyone else have the same setup? and if you do what cam are you running and what kind of numbers are u making? i pretty much have everything picked out except this.. so any help at all would be great.. thanks

 

[jaidedeye]

i have the FMS F303. i love it. my car explodes with power above 3500 rpm. nice choppy lopey idle and decent gas milage.

 

[sheff2720]

i have the FMS F303. i love it. my car explodes with power above 3500 rpm. nice choppy lopey idle and decent gas milage.

hows your torque? and how is it on cold start ups? i was looking at this cam before and the duration seemed liked alot to me, and i dont want to have to fly cut my pistons.. you wouldnt happen to have any numbers would you? thanks for the reply.. keep them comin

 

[jaidedeye]

torque is good. really awsome above 3500. no cold start problems at all. as a matter of fact i dont even give my car any gas even on the first start in the morning. i have 1.7 rockers so i have valve reliefs cut out. but with 1.6 rockers you might not have issues with clearence but in not positive. my motor was built for a supercharger so i dont have any numbers yet. but seat of the pants with my set up right now in N/Aform id say im 300hp at the wheels.....when i install my procharger p-1sc and my cobra intake ill be 430 whp. but i wont know for sure till i put it on the dyno and the wideband...

i recomend the F cam even for n/a applications..im sure others will disagree but it works awsome with my set up

 

[D347643]

i have a stage 1 cam and i love it, nice idle. pulls great in the upper rpm's too.

Drew