Need a little help. Torque thrust D measurement

[teddygt350]

Could someone with 15 x 7 torque thrust D rims (3 3/4 backspacing) please measure the distance from the axle plane to the backside of the spokes? This would be very helpful if possible.

Thanks

 

[phutch11]

I have Torq Thrust II in 15x7 and can measure if that helps.

Let me know.

Posted via Mobile Device

 

[teddygt350]

reply

Thank you for the reply and the offer to measure your wheels but I really need the measurement from the D style wheels. I am planning on possibly getting the trans am brakes (large calipers) up front and I know that the torque thust D 15 x 7inch wheel will fit. So what I want to find out is the distance from the mounting surface to the spokes so I can determine if there are any other wheels I may be able to use.

Thanks again.

 

[calpolymustang]

I have the 15x7 3.75 D's and will try take a measurement tomorrow.

Where are you located, anyway? I might be selling my rear 15x7s so I can upgrade to the 16x8 version (CL205).

 

[teddygt350]

Reply

Thanks calpoly. I am located in San Jose, CA. At this point I am not sure which rims I am going to use. I want to figure out what my options are if I get the trans am brakes and go from there.

Thanks again.

 

[calpolymustang]

It looks like its somewhere between 3.5 and 4". Its kind hard to tell because I'm holding the tape measure and at an awkward angle.